Troubleshoot slow internet on Google Nest Wifi or Google Wifi

When your Wi-Fi is slow, it can affect the performance of all of your devices. Devices can include phones, tablets, computers, TVs, smart displays and speakers, and anything else connected to your Wifi router or points. 

Improve your Wi-Fi speed

Wi-Fi speed can vary depending on a few things: the type of device you are using, distance between the device and your router or point, the frequency your devices are connected to, and physical barriers like walls in your home.

To improve your Wi-Fi speed, try one or more of these steps:

  • Move the connected device closer to your Wifi router or point.
  • Run a mesh test to confirm placement of your Wifi points. Try to move your router or point to a more open or unobstructed location and your router or points closer to each other.
  • Restart your network.
  • Contact your Internet Service Provider (ISP) to confirm your service is working properly.

Things that could affect your Wi-Fi speed

  • Your device is far from your Wifi router or point(s). Often, moving your device closer to your router or point will result in improved speeds.
  • Building materials and other objects located between your router and Wifi points or between your Wifi points and mobile devices may slow your connection. If possible, try to use your device within a clear line of sight to your router or point.
  • The internet speed from your provider may be currently slower than expected. Test your internet speeds. If the results are less than you expected, contact your ISP.
  • Devices connected on the 2.4 GHz channel may not achieve speeds as fast as the 5 GHz channel.
  • Some devices do not support the faster Wi-Fi standards. Speed is dependent on both the router or point and the device that is connected to it. If you have an older device, it’s likely it won’t support the latest standards for the fastest speeds.
  • There could be signal interference due to traffic on your Wi-Fi network, on your neighbors' Wi-Fi networks, or from other sources like microwaves or baby monitors.
Too far from your Wifi point

The closer your device is to your Wifi router or point, the better your Wi-Fi can perform. Your Wifi router and points should be centrally located. Make sure there is a clear line of sight between your router and points and there isn’t anything too close to your router or points that may physically block the signal to your device. Learn where to put your Wifi points.

Other devices are using bandwidth

Whenever a device connects to your Wi-Fi network, it competes with other devices for bandwidth (internet speed). A TV streaming Netflix, a laptop downloading, and an Xbox Live gaming session, all require bandwidth, and depending on your service, performing multiple high-bandwidth activities at the same time may result in a slower connection. 

To solve this:

Slow WAN connection

Modem issues

You can restart your modem to fix internet connection problems, improve slow performance and resolve common wireless issues. Even if your modem appears to be working correctly, you may need to restart it to establish a secure connection to the Wifi point.

Here’s how to reboot a modem:

  1. Unplug the power cable from the modem.
  2. Wait 2 minutes.
  3. Reconnect the power cable to the modem.
  4. Wait for the modem and router or primary Wifi point to boot up and the internet light to turn on, then check if your connection speed has improved.

Ethernet cables or upstream equipment issues

Nest Wifi and Google Wifi support 10/100/1000 Mbps (Megabits per second) on the Ethernet port. However, your internet speeds will be limited by the slowest component on your network. It can be reduced to 100 Mbps or 10 Mbps if the connection on the path to the internet doesn’t support the higher speed. 

If you’re not getting your expected internet speeds in your internet speed test or if you have received a priority event notice for limited Ethernet speeds in your Google Home app feed:

  1. Check if you have an Ethernet cable with a speed rating that’s lower than the expected speeds from your Internet Service Provider (ISP). Cat 5e or Cat 6 are recommended for more than 100 Mbps internet speeds.
  2. Check the Ethernet port ratings of any equipment in your network. Examples: Switch, modem, splitter, etc. 
    • They should all be rated as fast or faster than the speed from your ISP.
    • The software configuration of your equipment could also be reducing your network’s speed.
Other nearby routers causing interference

If one or more wireless routers broadcast Wi-Fi near your Wifi router or points, this may cause interference. As a result, your Wi-Fi performance can suffer.

If another router broadcasts the same Wi-Fi network name as your Google Nest Wifi router or Google Wifi point, your devices may jump between your points and the other router or your devices might not be able to connect. 

Try to turn off Wi-Fi on the non-Google router or move the routers farther apart.

Turn off Wi-Fi on non-Google Wi-Fi router

One solution is to turn off Wi-Fi on your other router (not Google Nest Wifi or Google Wifi devices). Check the lights in the front of the router. Most routers have a light indicating whether the wireless radios are active or inactive. The light may look like this: .

To disable Wi-Fi, go into the router’s settings and turn off the wireless option. To access your router’s settings, you may have to open an internet browser while connected to the non-Google router. Then open an internet browser and enter your router’s IP address in the address bar, like this:

Steps will vary depending on the router. If your router was supplied by your ISP, they can assist in turning off your Wi-Fi. Many ISPs and manufacturers provide instructions on how to do this.

Wifi router or point issues

Restarting your Wifi router or point can sometimes fix connectivity issues. This won’t erase any data and all of your settings will remain. Learn more about how to restart your Google Nest or Google Wifi devices.

Related articles

Test mesh connection between Wifi points
Test Wi-Fi speed to connected devices
Networking issues
Hardwire Google Nest Wifi routers, Google Wifi points and other devices

Was this helpful?
How can we improve it?