Standard video ad rules

Only available in Google Ad Manager 360.

Standard video ad rules allow you to set when and how videos appear within a single video stream. For example, you may want to show two 60-second ad breaks during an episode of a TV show, appearing at specific cue points.

Session ad rules allow you to set when and how pre-rolls appear with multiple video streams.

View related Skillshop training course

Create a standard video ad rule

  1. Sign in to Google Ad Manager.

  2. Click Video, then Ad rules, then New ad rule.

  3. Enter a name, select Standard as the type, and select a priority.

  4. Configure your rule based on the standard ad rule options.

  5. Define date settings and optionally choose to delay applying the rule or set a limit on the number of days it will apply based on the publish date.

  6. Configure targeting to apply this rule to particular ad requests. Ad rules without specific targeting apply to all ad requests, in order of priority.

  7. Click Save.

Both standard and session rules can't apply to the same request. If rules of both types are eligible, the higher priority rule applies. This might be helpful in situations where you only want to show ads every few videos, but also want to ensure that a video with a sponsorship always shows an ad.

Standard ad rule options

Expand all  Collapse all

Enable or disable video pre-rolls, mid-rolls, or post-rolls

Enable

Enables the ad break type and allows you to configure ad display.

Disable

Deactivates the ad break type.

Defer

Defers to lower priority rules. For example, if you select "Defer" for pre-rolls, and a lower priority ad rule has "Disable" chosen, then pre-rolls never show.

Set mid-roll display frequency
Click Video, then Content, then select the video and ensure the "Duration" and "Mid-roll cue points" were ingested correctly.

When you set "Video mid-rolls" to "Enabled", you can see the following options which allow you to set the display frequency:

At fixed times

Displays ad pods at the second values you set. For example, you can enter 60,120,180 to show ads at the 60, 120, and 180 second marks.

Every N seconds

Displays ad pods at the second value interval you set. For example, enter 60 to show ads every 60 seconds.

At fixed cue points

Displays ad pods at the cue point values you set, matching predefined cue points in ingested videos. For example, enter 1,4 to show ads at the first and fourth cue points. You can optionally specify settings for each mid-roll to set configurations for every cue point.

Every N cue points

Displays ad pods at cue point intervals you set, which match the cue points in ingested videos. For example, enter 3 to show ads at every third cue point.

Time values must be entered in whole numbers only, without decimals. Minutes are based on clock time; pausing a stream does not stop the clock.

Last mid-roll settings (Beta) 

You can select Specify settings for the last mid-roll if you want the ad break that becomes the last mid-roll to have separate settings from the other mid-rolls.*

* This is a beta feature and is not yet supported in forecasting.

Configure ad pods and break templates
Enable video pre-rolls, mid- rolls and post-rolls to set up ad pods and break templates.

Pod type

Ad pods are groups of ads shown in sequence. Standard pods allow you to specify the maximum number of ads and the maximum duration for each ad. Optimized pods allow you to additionally specify the maximum pod duration.

Max ads

The limit on the number of ads that can be shown in a pod. The "No max" option is only available for optimized pods.

Max ad duration

The duration limit for each ad in the pod. If no ads of the specified duration are available to fill a required ad slot, that slot is not filled.

Max pod duration

The duration limit for the entire pod, which is the duration sum of all of the ads that can serve in the pod. This option is only available for optimized pods.

Pre-roll break template

For optimized pods, define how ads should serve with ad spots. You can configure a maximum of 10 ad spots per break template.

When you choose optimized pods, you configure one or more ad spots, which have a set duration, allow you to only serve to specific line item types, and optionally block backfill and inventory sharing.

Set frequency caps

Enable

Enables you to specify frequency caps for pods, streams, or both.

Disable

Deactivates all frequency caps for the ad rule.

Defer

Defers to lower priority ad rules. For example, if you select "Defer" for frequency caps, and choose "Enable" for a lower priority ad rule, then the settings for that ad rule apply.

Was this helpful?

How can we improve it?
Search
Clear search
Close search
Google apps
Main menu