Here's how to install and set up Google Meet hardware for your company or group.
Before you begin
- If your organization does not use Google Workspace, before you install any devices, see Verify your organization’s domain.
- If you’re not sure if you use Google Workspace, ask your organization’s IT administrator for help.
Step 1: Read your welcome email
To avoid errors, you need to read the information in your welcome email before you turn on and enroll any devices. Your welcome email has information about device licenses and how to access the Google Admin console. You need a device license for each Chromebox you want to enroll and at least 2 devices and 2 licenses to communicate between rooms.
To check how many device licenses you have:
Go to Menu DevicesGoogle Meet hardwareDevices.
Some features require the Chrome devices for meetings with Calendar privilege.
- At the left, under Google Meet hardware, click Licenses.
- On the Subscriptions page, click Meet hardware management to verify the number of licenses in your domain.
Step 2: Review requirements
Make sure the room, network, and other components are ready to go. Review the Google Meet hardware requirements.
Step 3: Unpack the box
Every kit includes a card with your device's serial number. Keep this card and note the room where the device is located so you can easily identify which device is in which room. You need the serial number if you contact support for assistance.
The Chromebox supports multiple models and types, and the kit does not include display monitors. Use a 1080p (1920 x 1080 pixel resolution) monitor with a screen size between 40 and 55 inches (101 and 140 cm). For guidance on correctly sizing your display, read the Google Room design guide.
Check the box to make sure no items are missing or damaged. If needed, contact the manufacturer or your Google reseller.Series One
Quick Start Guides are included with each kit:
Series One hardware uses power over ethernet (POE) for connections between devices. Cables are included with the hardware in the following lengths:
|Device type||Cable length||Cable type|
|Smart camera Lite||2m (6.5ft)||CAT 5E UTP 28AWG|
|Smart camera XL||2m (6.5ft)||CAT 5E UTP 28AWG|
|Smart audio bar||2m (6.5ft)||CAT 5E STP 28AWG*|
|5m (16.5ft)||CAT 5E UTP 28AWG|
|Add-on audio bar||2m (6.5ft)||CAT 5E UTP 28AWG|
|Mic pod||2m (6.5ft)||CAT 5E UTP 28AWG|
|Meet touch controller||5m (16.5ft)||CAT 5E UTP 28AWG|
|Meet compute system||2m (6.5ft)||
CAT 5E UTP 28AWG
*CAT5E STP or higher for compute box to smart audio bar only
Each cable length can be extended in accordance with TIA/EIA 568-C.2 standards to support a wide range of installation scenarios. Please refer to these guidelines when planning your installation:
- CAT5E or higher.
- 24AWG or higher is recommended for cable lengths longer than 10m.
- Cables that are terminated on-site from bulk cables must be certified to CAT5E or higher using a cable tester.
- Patch connections from bulk cabling can be used if the total point-to-point cable run is certified, tested, and does not exceed TIA/EIA 568-C.2 standards.
Depending on the model, your Google Meet hardware kit can contain:
- Google Meet speakermic and touchscreen controller
- Getting started guide
- Mounting bracket
- Mounting hardware
- Table mat
- Camera USB cable
- Speakermic cable
- Touchscreen mini-HDMI cable (green)
- Touchscreen mini-USB data cable (blue)
- Touchscreen micro-USB power cable (red)
- Chromebox power cable
The Google Meet speakermic contains:
- Google Meet speakermic
- Speakermic power cable and wall adapter
- Ethernet cable to connect multiple speakermics
Step 4: Install the hardware
For guidance on how best to plan and install your Meet hardware kits, refer to our Room design guide.
Use your Chromebox over a wired network connection for best sound and video quality. However, you can also use it over a wireless network connection.
- Connect cables first, then connect to a power outlet.
- Ensure Cat 5e cables are properly seated.
- Cables ends are color coded for easy identification.
For further information, see the Logitech Google Meet installation guide.
To print this diagram, download Welcome to your Google Meet hardware kit (pdf).
Connect the speakermic, monitor, and camera directly to the Chromebox or connect them to the Chromebox using qualified USB 3.0 hubs. Use the USB cable to connect the touchscreen directly to the Chromebox. For Chromebox CN65, the secondary video output is USB Type-C.
You can connect multiple speakermics to the Google Meet hardware. For more information, see the Meet speakermic Quick Start Guide.
Do not plug the HDMI cable from the touchscreen into the Chromebox. This cable is plugged in to your computer to present content only to the room. If both HDMI and Displayport are used, HDMI will act as the primary display.
In the CN65 hardware kit, the bundled power supply has a higher wattage. It's not compatible with older, existing power supplies.
End of life Google Meet kits
Google Meet hardware kit (CN62) Small room
Google Meet hardware kit (CN62) Large room
To print this diagram, download the Google Meet hardware kit configuration guide.
Standard Chromebox for meetings kit
Chromebox for meetings large room kit
Google, Google Workspace, and related marks and logos are trademarks of Google LLC. All other company and product names are trademarks of the companies with which they are associated.