Rich Media creatives
Collect site specs
The media agency is responsible for collecting site specs. It's best to start this process when the media agency begins the request for proposal (RFP) for the site or purchases the media.
Different publishers often have different specifications for Rich Media creatives. So to make sure your ad can run across all sites, create a lowest common denominator (LCD) chart (see below) and deliver it to your creative agency before the unit is built. If you build to the LCD, we’ll be able to build one ad that conforms to the limits of multiple sites.
If you haven't finalized creative specs yet but want to provide guidelines to the creative team, show them Best practices for LCD guidelines in the interim.
Spec collection is a three-step process:
Step 1: Finalize the media plan
The media plan document must include:
- A list of the sites targeted for your campaign, with start and end dates, impression levels, and placement names if available
- Creative ad sizes (e.g. 300x250, 728x90) and types (e.g. expanding, floating) for each site
- Features for each type (video, audio, etc.)
- Names, email addresses, and phone numbers for your trafficking and sales contacts for each site
Step 2: Collect site specs from each site
These must include the sizes and types of units that you're running in the media plan. Use these forms:
Step 3: Generate an LCD
After site specs are gathered, generate an LCD. The LCD is based on the smallest file size, expansion size, expansion direction, etc. for each size and type of banner chosen to accommodate all publishers on the media plan. Please fill out the first tab of this spec sheet.
To find an LCD, look at all the ad specs for the publisher sites you want to serve on. Then take the smallest file size, expansion size, expansion direction, etc. for each size and type of creative.
Let's say your client wants to run an expanding ad on three sites. Here are examples of some specs for each:
|Site||Size||Expand direction||Expand size||Initial load||Subsequent (polite) load||Total load||Expansion method|
|Site 1||728 x 90||left||728 x 240||40 K||70 K||110 K||Click to expand|
|Site 2||728 x 90||left||728 x 260||35 K||55 K||90 K||Mouse-over or click to expand|
|Site 3||728 x 90||right||728 x 120||40 K||60 K||100 K||Mouse-over or click to expand|
What's the LCD?
|Site||Size||Expand direction||Expand size||Initial load||Polite load||Total load||Allowed expand directions|
|LCD||728 x 90||MDE||728 x 120||30 K||55 K||90 K||Click to expand.1|
1If one site requires mouse-over and another requires click to expand, you must create two units, one for each requirement.
Sarah is a DoubleClick Studio expert and author of this help page. Help her improve this article by leaving feedback below.