Import and delete an antenna with the Network Planner. Before you can add a site and plan your network, import an antenna to the library. The antenna library is available across your organization’s projects.
View available antennas in the library- On your computer, sign in to the Network Planner.
- Click View projects and, in the left panel, select your organization.
- In the center panel, select your project and click Open.
- On the left, click the Antenna tab .
- To open details, select an antenna.
Tip: To sort antennas by various fields, click Browse at the top of the Antenna tab and click on the column header you want to sort by.
- On your computer, sign in to the Network Planner.
- Click View projects and, in the left panel, select your organization.
- In the center panel, select your project and click Open.
- At the top, click Import .
- Under "Import from," select Computer.
- Tip: To access the antenna template, you can also click Antennas template.
- Find your file and click Open.
Tip: You can also drop a file directly onto the page to import an antenna.
The antenna template must be filled out correctly or the antenna won’t be added to the library.
- Manufacturer: The name of the antenna manufacturer.
- Model Name: The model of the antenna.
- Acquisition Frequency (MHz): The frequency the antenna pattern was measured at. It’ll be above the start frequency and below the end frequency.
- Frequency Start & End (MHz): The operating range of the antenna.
- Normal Gain (dBi): The normal gain of the antenna.
- Important: Antenna gains are absolute numbers. The peak gain has to be shown for the peak lobes.
- Beamwidth (Degrees): The width of the antenna’s main beam.
- Electrical Downtilt (Degrees): The elevation angle of the antenna’s peak gain.
- Important: This will be zero if not specified.
- Electrical Downtilt (Min & Max): The antenna’s electrical downtilt range.
- Important: Only use these if the antenna has a variable electrical tilt pattern.
- Angle (Degrees): From -179 to 180 degrees, specify the Azimuth Gain (dBi) and Elevation Gain (dBi).
Important: You can’t delete an antenna if it’s in use by any project.
- On your computer, sign in to the Network Planner.
- Click View projects and, in the left panel, select your organization.
- In the center panel, select your project and click Open.
- On the left, click the "Antenna" tab .
- Right-click the antenna you want to remove.
- Click Delete antenna.