Set up and control Seamless setup smart devices

The Seamless setup process allows you to set up compatible devices from start to finish in the Google Home app. When you choose devices that are supported for Seamless setup, you'll not need a bridge, hub or the device maker’s app.


Set up your smart light

  1. Set up your Google Nest or Home speaker or display, if you haven’t already done so.
  2. Plug in and turn on your smart light in the same room as your speaker or display.
  3. Open the Google Home app Google Home app. Make sure that you have the most recent version.
  4.  At the top left, tap Add   Set up device plus  New device .
  5. Choose a home in which to set up the light bulb and tap Next.
  6. Your device will start scanning for nearby devices that are ready for setup.
  7. Tap Set up smart lights.
  8. Select the light bulbs that you’d like to set up. Your bulbs will blink when selected.
  9. Room selection: Choose what room your bulb is in.
    • You can create a custom room by tapping Add custom room and then type in room name and then Next.
  10. Create a unique name. Type in the name for your light that you'll use for voice commands. It's recommended to use a name like 'reading light' or 'overhead light.' For best results, don’t include the room in the light’s name. (When you say the room name in a voice command, your speaker or display controls all the lights in the room.)
  11. Setting up your smart light. Your light may blink a few times.
  12. Your light is ready. Tap Done.
  13. Setup is successful. You can now control your lights with your speaker or display.

Control your lights

Basic voice commands

To do this: Say 'Hey Google,' then:
Turn a light on or off 'Turn on or off <light name>'
Dim a light 'Dim the <light name>'
Brighten a light 'Brighten the <light name>'
Set a light brightness to a certain percentage 'Set <light name> to 50%'
Dim or brighten lights by a certain percentage 'Dim <light name> by 50%'

'Brighten <light name> by 30%'

Change the colour of a light

(if the light supports colour)

'Set <light name> to <colour>'
Turn all lights in room on or off

'Turn on or off lights in <room name>' 
'Lights on or off'

Turn all lights on or off 'Turn on or off all of the lights'
Was this helpful?
How can we improve it?