Start here if you have a new Google Nest Doorbell (battery), or if you've removed your Nest Doorbell (battery) from the app and want to add it back.
You need the app to connect your doorbell to Wi-Fi and get recorded video, so you should always use the app as your primary guide to set up and install your doorbell.
Here's a brief overview of steps to get started with wired or wire-free installation, along with some important troubleshooting.
|
This article only applies to the following device: |
|
|
|
|
|
Nest Doorbell (battery) |
More installation help
For help with the installation of the Nest Doorbell (wired), go to our Install Nest Doorbell (wired) article.
You can also find instructions to install the Nest Doorbell with an Indoor Power Adapter.
Installation videos
Wire-free installation
How To Install Your Battery-Powered Nest Doorbell Wire-Free
Wired installation
How To Install Your Nest Doorbell With Existing Chime Wires
Wire-free installation1. Check that you have everything for installation
Check that you have all the parts included in the box.
What's included in the box:
- Nest Doorbell (battery)
- Wall plate
- Wedge
- Wire extenders (Note: You won't need these for wire-free installation.)
- Screws
- Wall anchors
- Spacers
- Unlock tool
- USB-C to USB-A charging cable
Need a wedge?
The Nest Doorbell (battery) already comes with a wedge that you can use to adjust the doorbell's camera angle if it's located in a corner. This wedge can angle your doorbell horizontally up to 20°.
If your doorbell needs a wider horizontal angle or if you need to adjust the angle vertically, you can purchase a Made For Google doorbell wedge.
Tools:
- Phillips screwdriver
- Power drill
- Phillips drill bit
- 1/4 in (6.5 mm) drill bit (for wall anchors)
- 3/32 in (2 mm) drill bit (optional, to drill into hard materials like brick and stucco)
- Spirit level (to check doorbell alignment)
App and Internet requirements:
- The Google Home app
- A compatible phone (to connect to Wi-Fi and use the Home app)
- Your Wi-Fi network name and password
- A broadband Internet connection, with at least 2 Mbps for your doorbell
Use a Google Home or Nest speaker or display (recommended)
Your doorbell can't use your home's doorbell chime with wire-free installation. So if you want to get notified when someone rings your doorbell when you're home, connect a Google speaker or display and set up visitor announcements.
2. Charge the doorbell before installation
Use the included USB cable to fully charge your doorbell for wire-free installation. Keep it plugged in during setup so that it can connect to the app and the Wi-Fi network.
The status light will pulse white when your doorbell is charging and will appear solid white when it's completely charged.
3. Connect the doorbell to the app with the QR code
Follow the steps below to add your doorbell to the app and begin installation.
- If you haven't already, download the Google Home app from the Apple App Store or Google Play Store.
- Open the Google Home app
.
- Tap Devices
Add
.
- Choose the home you want to add your doorbell to, or select Add another home to create a new one. Then, tap Next.
- Choose the home to which you want to add your doorbell, or select Add another home to create a new one. Then, tap Next.
- The app will try to look for nearby devices. If prompted, select the Nest Doorbell (battery) as the device that you want to set up.
- Use your phone's camera to scan the QR code on the back of the doorbell. You can also tap Continue without scanning and enter the numbers near the QR code.
- The app will help guide you through setup and installation.
.
Add 
.4. Troubleshoot if needed
During setup, the app lets you connect your doorbell to Wi-Fi, personalise settings, check the video quality and more.
If you have any issues, here are some quick tips.
Connection issues
If you can't find your Wi-Fi network, or if your doorbell has trouble connecting to the Wi-Fi, here are a few things that you can do to try and fix the issue:
- Wait a few minutes, then try to connect your doorbell again.
- If possible, move your doorbell and router closer to each other to improve the signal.
- Reduce wireless interference.
- Try restarting your router.
- If you have a hidden Wi-Fi network, you'll need to type in the network name (SSID) manually in the app.
For more tips, go to our Troubleshoot adding Nest camera to the app article.
Power issues
Signs that your doorbell isn't getting enough power include the following:
- Your doorbell won't turn on.
- You get a message or status in the app telling you that there isn't enough power.
- Things like the Wi-Fi connection and the video quality can also be reduced when there isn't enough power.
Recharge your battery when the app tells you that its battery is low. If the battery seems to drain faster than it should, try to adjust settings to save more battery.
Video quality issues
If your doorbell is having video delays or lag, it's usually a sign that the Wi-Fi connection is weak. It could also be a sign that your doorbell doesn't have enough power. Try the following to try to fix the issue:
- If possible, move your doorbell and router closer to each other to improve the signal.
- Reduce wireless interference.
- Recharge your doorbell when the battery is low. If this is a recurring issue, try to adjust settings to save more battery.
If your doorbell's video is distorted, here are a few things that you can try to fix the issue:
- Dust off the camera lens.
- Ensure that your doorbell is shaded and protected from extreme weather conditions. While Nest Doorbells are built to work outside of your home, extreme hot or cold temperatures can affect things like video quality.
5. Use your doorbell
Learn more about Nest Doorbell basics, how to change settings and more in our Get started using your Nest Doorbell article.
1. Check compatibility and voltage requirements
While the Nest Doorbell can replace most wired doorbells, there are some cases where the doorbell system either doesn’t give enough power or gives too much power. You should check that your current doorbell can be replaced by the Nest Doorbell.
Note: Nest Doorbell (battery) does not support direct connection to the transformer.
Check doorbell system compatibility with Nest Doorbell
2. Check that you have everything for installation
Check that you have all the parts included in the box.
What's included in the box:
- Nest Doorbell (battery)
- Wall plate
- Wedge
- Wire extenders
- Screws
- Wall anchors
- Spacers
- Unlock tool
- USB-C to USB-A charging cable
Need a wedge?
The Nest Doorbell (battery) already comes with a wedge that you can use to adjust the doorbell’s camera angle if it’s located in a corner. This wedge can angle your doorbell up to 20°.
If your doorbell needs a wider angle to view important activity (e.g. 35° to 55°), you can purchase a Made For Google doorbell wedge.
Tools:
- Phillips screwdriver
- Power drill
- Phillips drill bit
- 1/4 in (6 mm) drill bit (for wall anchors)
- 3/32 in (2.38 mm) drill bit (optional, to drill into hard materials like brick and stucco)
- Spirit level (to check doorbell alignment)
App and Internet requirements:
- The Google Home app
- A compatible phone (to connect to Wi-Fi and use the Home app)
- Your Wi-Fi network name and password
- A broadband Internet connection, with at least 2 Mbps for your doorbell
3. Charge your doorbell before installation
Use the included USB-C cable to charge your doorbell. Keep it plugged in during setup so that it can connect to the app and Wi-Fi network.
The status light will pulse white when your doorbell is charging and will appear solid white when it's completely charged.
4. Turn the power off to your doorbell system
- Switch the power off for your doorbell and chime at your home’s circuit breaker or fuse box. This will protect you and your equipment during installation.
- Try to ring your doorbell to confirm that you’ve flipped the right switch to turn the power off. If needed, you can switch off the main power at the circuit breaker box instead.
5. Remove your old doorbell
Remove your old doorbell and disconnect the wires. You’ll probably need a screwdriver for this step.
Note: If you plan to replace the Nest Doorbell (wired), you’ll need to remove the chime connector that came with it, too – your Nest Doorbell (battery) doesn’t need it for wired installation.
Uninstall Nest Doorbell (wired)
Tip: As you remove your old doorbell, bend the doorbell wires or tape them so that they don’t slip back into the wall.
6. Connect the doorbell to the app with the QR code
Follow the steps below to add your doorbell to the app and begin installation.
- If you haven't already, download the Google Home app from the Apple App Store or Google Play Store.
- Open the Google Home app
- Tap Devices
- Choose the home you want to add your doorbell to, or select Add another home to create a new one. Then, tap Next.
- Choose the home to which you want to add your doorbell, or select Add another home to create a new one. Then, tap Next.
- The app will try to look for nearby devices. If prompted, select the Nest Doorbell (battery) as the device that you want to set up.
- Use your phone's camera to scan the QR code on the back of the doorbell. You can also tap Continue without scanning and enter the numbers near the QR code.
- The app will help guide you through setup and installation.
7. Troubleshoot if needed
During setup, the app lets you connect your doorbell to Wi-Fi, personalise settings, check the video quality and more.
If you have any issues, here are some quick tips.
Connection issues
If you can't find your Wi-Fi network, or if your doorbell has trouble connecting to the Wi-Fi, here are a few things that you can do to try and fix the issue:
- Wait a few minutes, then try to connect your doorbell again.
- If possible, move your doorbell and router closer to each other to improve the signal.
- Reduce wireless interference.
- Try restarting your router.
- If you have a hidden Wi-Fi network, you'll need to type in the network name (SSID) manually in the app.
Power issues
Signs that your doorbell isn't getting enough power include the following:
- Your doorbell won't turn on.
- You get a message or status in the app telling you that the battery is low.
- Things like the Wi-Fi connection and the video quality can also be reduced when there isn't enough power.
Video quality issues
If your doorbell is having video delays or lag, it's usually a sign that the Wi-Fi connection is weak. It could also be a sign that your doorbell doesn't have enough battery. Try the following to try to fix the issue:
- If possible, move your doorbell and router closer to each other to improve the signal.
- Reduce wireless interference.
- Troubleshoot battery issues for your doorbell.
If your doorbell’s video is distorted, here are a few things that you can do to troubleshoot:
- Dust off the camera lens.
- Ensure that your doorbell is shaded and protected from extreme weather conditions. While Nest Doorbells are built to work outside of your home, extreme hot or cold temperatures can affect things like video quality.
For more tips, go to our Troubleshoot Nest camera video distortion article.
Chime issues
If you have a mechanical chime with moving parts and it didn’t ring or didn’t sound right, try the following:
- Remove the chime cover and check that the wires aren’t touching any moving parts.
- Make sure that any exposed wire ends (with bare copper showing) aren’t touching each other.
- Test your chime again.
You can get more help to troubleshoot chime issues in our Help Centre.
8. Use your doorbell
Learn more about Nest Doorbell basics, how to change settings and more in our Get started using your Nest Doorbell article.
Connect power wires to Nest Doorbell
- Before you connect the wires make sure they are clean.
- Connect the power wires to the wire connectors.
- It doesn’t matter which connector you attach a wire to.
- Press down on the release tabs to insert the wires into the connectors.
- If you see exposed wire, remove the connectors and trim any excess wire.
- Important: Don’t let the connectors touch the backplate. This can cause an electrical short and damage the doorbell. Make sure that they only touch the screws. Tighten the screws to secure the connectors.
- Make sure the wires point down, not up, so the extra wire can be tucked back into the wall.