Notification

We are experiencing extremely high contact volume right now and estimated wait times will be higher than normal. We appreciate your patience and understanding as we work to provide support as quickly as possible. In the meantime, please visit our Help Center for troubleshooting articles and our Community Forums.

Install Nest Doorbell (battery)

Start here if you have a new Google Nest Doorbell (battery), or if you've removed your Nest Doorbell (battery) from the app and want to add it back.

You need the app to connect your doorbell to Wi-Fi and get recorded video, so you should always use the app as your primary guide to set up and install your doorbell.

Here's a brief overview of steps to get started with wired or wire-free installation, along with some important troubleshooting.

This article only applies to the following device:

Nest Doorbell (battery)

More installation help

You can get more help to install Nest Doorbell (wired, 2nd gen) or install Nest Doorbell (wired) in our Help Center.

You can also find instructions to install the Nest doorbell with an indoor power adapter.

Installation videos

Wire-free installation

How To Install Your Battery-Powered Nest Doorbell Wire-Free

Wired installation

How To Install Your Nest Doorbell With Existing Chime Wires

Wire-free installation

1. Check that you have everything for installation

Check that you have all the parts included in the box.

What's included in the box:

  • Nest Doorbell (battery)
  • Wall plate
  • Wedge
  • Wire extenders (Note: You won't need these for wire-free installation.)
  • Screws
  • Wall anchors
  • Spacers
  • Unlock tool
  • USB-C to USB-A charging cable

Need a wedge?

The Nest Doorbell (battery) already comes with a wedge that you can use to adjust the doorbell's camera angle if it's located in a corner. This wedge can angle your doorbell horizontally up to 20°.

If your doorbell needs a wider horizontal angle or if you need to adjust the angle vertically, you can purchase a Made for Google doorbell wedge.

Tools:

  • Phillips screwdriver
  • Power drill
    • Phillips drill bit
    • 1/4 in (6.5 mm) drill bit (for wall anchors)
    • 3/32 in (2 mm) drill bit (optional, to drill into hard materials like brick and stucco)
  • Bubble level (to check doorbell alignment)

App and internet requirements:

  • The Google Home app
  • A compatible phone (to connect to Wi-Fi and use the Home app)
  • Your Wi-Fi network name and password
  • A broadband internet connection, with at least 2 Mbps for your doorbell

Use a Google Home or Nest speaker or display (recommended)

Your doorbell can't use your home's doorbell chime with wire-free installation. So if you want to get notified when someone rings your doorbell when you're home, connect a Google speaker or display and set up visitor announcements.

2. Charge the doorbell before installation

Use the included USB cable to fully charge your doorbell for wire-free installation. Keep it plugged in during setup so that it can connect to the app and the Wi-Fi network.

The status light will pulse white when your doorbell is charging, and will appear solid white when it's completely charged.

3. Connect the doorbell to the app with the QR code

Follow the steps below to add your doorbell to the app and begin installation.

  1. If you haven't already, download the Google Home app from the Apple App Store or Google Play Store.
  2. Open the Google Home app Google Home app.
  3. Tap Devices Add Google Nest or partner device Google Nest or partner device..
  4. Choose the home you want to add your doorbell to, or select Add another home to create a new one. Then, tap Next.
  5. The app will try to look for nearby devices. If prompted, select the Nest Doorbell battery as the device you want to set up.
  6. Use your phone's camera to scan the QR code on the back of the doorbell. You can also tap Continue without scanning and enter the numbers near the QR code.
  7. The app will help walk you through setup and installation.

4. Troubleshoot if needed

During setup, the app lets you connect your doorbell to Wi-Fi, personalize settings, check the video quality, and more.

If you have any issues, here are some quick tips.

Connection issues

If you can't find your Wi-Fi network, or if your doorbell has trouble connecting to the Wi-Fi, here are a few things you can do to try and fix the issue:

  • Wait a few minutes, then try to connect your doorbell again.
  • If possible, move your doorbell and router closer to each other to improve the signal.
  • Reduce wireless interference.
  • Try restarting your router.
  • If you have a hidden Wi-Fi network, you'll need to type in the network name (SSID) manually in the app.

For more tips, go to our Troubleshoot adding Nest camera to the app article.

Power issues

Signs that your doorbell isn't getting enough power include the following:

  • Your doorbell won't turn on.
  • You get a message or status in the app telling you there isn't enough power.
  • Things like the Wi-Fi connection and the video quality can also be reduced when there isn't enough power.

Recharge your battery when the app tells you its battery is low. If the battery seems to drain faster than it should, try to adjust settings to save more battery.

Video quality issues

If your doorbell is having video delays or lag, it's usually a sign that the Wi-Fi connection is weak. It could also be a sign that your doorbell doesn't have enough power. Try the following to try to fix the issue:

If your doorbell's video is distorted, here are a few things you can try to fix the issue:

  • Dust off the camera lens.
  • Ensure your doorbell is shaded and protected from extreme weather conditions. While Nest doorbells are built to work outside of your home, extreme hot or cold temperatures can affect things like the video quality.
For more tips, go to our Troubleshoot Nest camera video distortion article.

5. Use your doorbell

Learn more about Nest doorbell basics, how to change settings, and more in our Get started using your Nest doorbell article.

Wired installation

1. Check compatibility and voltage requirements

While the Nest doorbell can replace most wired doorbells, there are some cases where the doorbell system either doesn't give enough power or gives too much power. You should check that your current doorbell can be replaced by the Nest doorbell.

Check doorbell system compatibility with Nest doorbell

2. Check that you have everything for installation

Check that you have all the parts included in the box.

What's included in the box:

  • Nest Doorbell (battery)
  • Wall plate
  • Wedge
  • Wire extenders
  • Screws
  • Wall anchors
  • Spacers
  • Unlock tool
  • USB-C to USB-A charging cable

Need a wedge?

The Nest Doorbell battery already comes with a wedge that you can use to adjust the doorbell's camera angle if it's located in a corner. This wedge can angle your doorbell up to 20°.

If your doorbell needs a wider angle to view important activity (Like 35° to 55°), you can purchase a Made for Google doorbell wedge.

Tools:

  • Phillips screwdriver
  • Power drill
    • Phillips drill bit
    • 1/4 in (6 mm) drill bit (for wall anchors)
    • 3/32 in (2.38 mm) drill bit (optional, to drill into hard materials like brick and stucco)
  • Bubble level (to check doorbell alignment)

App and internet requirements:

  • The Google Home app
  • A compatible phone (to connect to Wi-Fi and use the Home app)
  • Your Wi-Fi network name and password
  • A broadband internet connection, with at least 2 Mbps for your doorbell

3. Charge your doorbell before installation

Use the included USB-C cable to charge your doorbell. Keep it plugged in during setup so that it can connect to the app and Wi-Fi network.

The status light will pulse white when your doorbell is charging, and will appear solid white when it's completely charged.

4. Turn the power off to your doorbell system

  1. Switch the power off for your doorbell and chime at your home's breaker or fuse box. This will protect you and your equipment during installation.
  2. Try to ring your doorbell to confirm that you've flipped the right switch to turn the power off. If needed, you can switch off the main power at the breaker box instead.

5. Remove your old doorbell

Remove your old doorbell and disconnect the wires. You'll probably need a screwdriver for this step.

Note: If you plan to replace the Nest Doorbell (wired), you'll need to remove the chime connector that came with it, too–your Nest Doorbell (battery) doesn't need it for wired installation.

Uninstall Nest Doorbell (wired)

Tip: As you remove your old doorbell, bend the doorbell wires or tape them so they don't slip back into the wall.

6. Connect the doorbell to the app with the QR code

Follow the steps below to add your doorbell to the app and begin installation.

  1. If you haven't already, download the Google Home app from the Apple App Store or Google Play Store.
  2. Open the Google Home app Google Home app.
  3. Tap Devices Add Google Nest or partner device Google Nest or partner device..
  4. Choose the home you want to add your doorbell to, or select Add another home to create a new one. Then, tap Next.
  5. The app will try to look for nearby devices. If prompted, select the Nest Doorbell (battery) as the device you want to set up.
  6. Use your phone's camera to scan the QR code on the back of the doorbell. You can also tap Continue without scanning and enter the numbers near the QR code.
  7. The app will help walk you through setup and installation.

7. Troubleshoot if needed

During setup, the app lets you connect your doorbell to Wi-Fi, personalize settings, check the video quality, and more.

If you have any issues, here are some quick tips.

Connection issues

If you can't find your Wi-Fi network, or if your doorbell has trouble connecting to the Wi-Fi, here are a few things you can do to try and fix the issue:

  • Wait a few minutes, then try to connect your doorbell again.
  • If possible, move your doorbell and router closer to each other to improve the signal.
  • Reduce wireless interference.
  • Try restarting your router.
  • If you have a hidden Wi-Fi network, you'll need to type in the network name (SSID) manually in the app.
For more tips, go to our Troubleshoot adding Nest camera to the app article.

Power issues

Signs that your doorbell isn't getting enough power include the following:

  • Your doorbell won't turn on.
  • You get a message or status in the app telling you the battery is low.
  • Things like the Wi-Fi connection and the video quality can also be reduced when there isn't enough power.
For troubleshooting steps, go to our Troubleshoot battery issues for Nest camera and doorbell article.

Video quality issues

If your doorbell is having video delays or lag, it's usually a sign that the Wi-Fi connection is weak. It could also be a sign that your doorbell doesn't have enough battery. Try the following to try to fix the issue:

If your doorbell's video is distorted, here are a few things you can do to troubleshoot:

  • Dust off the camera lens.
  • Ensure your doorbell is shaded and protected from extreme weather conditions. While Nest doorbells are built to work outside of your home, extreme hot or cold temperatures can affect things like the video quality.

For more tips, go to our Troubleshoot Nest camera video distortion article.

Chime issues

If you have a mechanical chime with moving parts and it didn't ring or didn't sound right, try the following:

  1. Remove the chime cover and check that the wires aren't touching any moving parts.
  2. Make sure that any exposed wire ends (with bare copper showing) aren't touching each other.
  3. Test your chime again.

You can get more help to troubleshoot chime issues in our help center.

8. Use your doorbell

Learn more about Nest doorbell basics, how to change settings, and more in our Get started using your Nest doorbell article.

Connect power wires to Nest Doorbell

  • Before you connect the wires make sure they are clean.
  • Connect the power wires to the wire connectors.
    • It doesn’t matter which connector you attach a wire to.
    • Press down on the release tabs to insert the wires into the connectors.
    • If you see exposed wire, remove the connectors and trim any excess wire.
  • Important: Don’t let the connectors touch the backplate. This can cause an electrical short and damage the doorbell. Make sure that they only touch the screws. Tighten the screws to secure the connectors.
  • Make sure the wires point down, not up, so the extra wire can be tucked back into the wall.

Without the connectors

  • Before you connect the wires to the screws, trim the wires and the insulation so only ¼ inch of wire is exposed.
  • Bend the wires clockwise into a hook shape and attach to the screws.
  • Important: Don’t let the wires touch the backplate. This can cause an electrical short and damage the doorbell. Make sure that they only touch the screws. Tighten the screws to secure the wires.
  • Make sure the wires point down, not up, so the extra wire can be tucked back into the wall.

Was this helpful?

How can we improve it?
Search
Clear search
Close search
Google apps
Main menu