Fix Google Home & Nest device pairing issues

If your Google Home or Nest device isn't connecting to the Google Home or Nest app during setup, use these troubleshooting steps to resolve common pairing issues. This guide will help you identify the problem and get your device set up successfully.

Below are some helpful resources if you have issues pairing a specific product:

Understand common pairing issues

Several factors can prevent your Google Home or Nest device from pairing correctly:

  • The Google Home or Nest device doesn’t have sufficient power.
  • The mobile device used to pair the Google Home or Nest device is connected to another Bluetooth device, or Bluetooth is disabled.
  • Network issues.
  • Network equipment settings that prevent the Google Home or Nest device from connecting.

Basic troubleshooting

Check your mobile device settings

Make sure that:

  • Your mobile device is connected to the same Wi-Fi network as your Google Home or Nest device.
  • Bluetooth is enabled, but not connected to any Bluetooth devices.
  • Cellular data is turned off.
  • For devices that run iOS 14 or later, ensure that local network access is enabled for the Google Home or Nest app:
  1. Make sure your phone or tablet is connected to Wi-Fi.
  2. Restart your modem and router, the assisting Nest device, and the new Nest device, then try again.
  3. Re-scan the QR code or manually enter the entry key. Learn how to Troubleshoot QR code scanning with your phone’s camera.

Check your Wi-Fi network settings

Before you troubleshoot, check for the recommended Wi-Fi settings and make sure that the Google Home or Nest device is awake and in pairing mode. Learn how to update Wi-Fi network and router settings.

  1. Quit and restart your Google Home or Nest app. Then restart your phone or tablet.
    • Try a different phone or tablet if this doesn’t fix the issue.
  2. Move your devices closer to the router. Then, restart your assisting device and network equipment (router, extender, or modem).
  3. Reset the device you’re pairing to default, then try to manually enter the entry key instead of scanning the QR code.
    • Test the connection by connecting to another device’s mobile hotspot or any other mobile network.

For specific devices:

Nest Thermostats

Make sure that your thermostat is charged to 3.8 V or more. You can verify this in the thermostat information menu in the Google Home or Nest app or on the thermostat device itself. Refer to Nest thermostat information menu.

For Nest Thermostat E devices, move the assisting device closer to the thermostat, then restart both devices.

Nest Cameras & Doorbells

If the device isn’t pairing, factory reset your device. Your camera or doorbell must be plugged in during the factory reset, even if it normally runs on battery power.

If the basic steps above don’t work, restart your equipment. Restart your modem, router, and your camera or doorbell then try again.

Troubleshoot a specific pairing phase for Nest devices

Some Nest devices such as Nest Protect and Nest x Yale Lock will connect to other Nest products already set up in your home to assist with the pairing process.

Getting info from the assisting device

Before you troubleshoot, make sure that your assisting device is within pairing distance of 2 or 3 meters.

Nest x Yale Locks: Make sure that the keypad cable is seated securely.

  1. Quit your Nest app or Google Home app, then restart your phone or tablet.
    • Try a different mobile device or tablet if this doesn’t fix the issue.
  2. Restart your assisting device and network equipment (router, extender, or modem).
  3. Reset the joining device to default, then try to manually enter the entry key instead of scanning.
    • Test the connection with a mobile hotspot.
    • Remove the batteries from the lock for 60 seconds. This step applies to Nest x Yale Locks only.
  4. Create a new home in the Google Home app or Nest app. Try to pair your Nest device again.
    • If it pairs and you wish to use the new home: Delete the old home. Reset your other devices. Add them to the newly created home.
    • If it pairs and you wish to use the old home:
      1. Remove all the devices from the current home.
      2. Reset the account connection.
      3. Tap Settings and then Network. Connect all devices using the same network.
      4. Pair the Nest devices in the app.

Connecting to the joining device

Make sure your assisting device is within 2 or 3 meters of the device you're pairing.

  1. Quit your Google Home app or Nest app, then restart your phone or tablet.
    • Try a different mobile device or tablet if this doesn’t fix the issue.
  2. Move your devices to within 3 - 6 ft and within line of sight of the router. Then, restart your assisting device and network equipment (router, extender, or modem).
  3. Reset the joining device to default, then try to manually enter the entry key instead of scanning.
    • Test the connection by connecting to another device’s mobile hotspot or any other mobile network.

Troubleshoot error codes

Was this helpful?

How can we improve it?
Search
Clear search
Close search
Main menu
12368395655448371322
true
Search Help Center
false
true
true
true
true
true
1633396
false
false
false
false
false