I see a black screen/no signal

If your TV screen is black or you're not getting a signal when trying to set up or use your Chromecast device, try the troubleshooting steps below:

Initial troubleshooting

  1. Make sure that the Chromecast is plugged in using the power cable and power adaptor that came with the Chromecast. The Chromecast should be plugged in directly to a wall socket.
  2. The LED light on the side of the Chromecast should be lit up.
  3. Make sure that the TV is tuned to the same HDMI input as the Chromecast. On most remotes, this is done using the Input, Source or Menu button. You may have to cycle through a few inputs before finding the correct one (e.g. HDMI1, HDMI2, etc.).
  4. If you still see a black screen after completing the above steps, reboot your Chromecast. 
    1. To reboot your Chromecast, unplug the power cable from the Chromecast device. Leave it unplugged for ~1 minute before plugging the power cable back in.
    2. Note: Unplugging the Chromecast from the TV’s HDMI port does not reboot the device. It must be disconnected from the power source in order to reboot.

Next steps

If your screen is still black after the reboot, choose what best describes what you're seeing on your TV screen and Chromecast device from the list below:

Black screen + White (solid or blinking) LED light
Try the following: Power off your TV
  • Shut down the TV completely (power off and disconnect the power cable from the wall socket).
  • Disconnect the Chromecast from the HDMI port and if the Chromecast is plugged into the wall socket, disconnect it.
  • Power on the TV and reconnect the power source to the Chromecast device but do not put the Chromecast into the TV HDMI port.
  • Wait 30 seconds.
  • Plug the Chromecast device into an HDMI port on the TV.
  • Change the TV to the same HDMI input as the Chromecast.
  • If you still see a black screen, try the step below. 
Use the HDMI extender provided with the Chromecast in a new HDMI port on the TV

Try using the HDMI extender that came with your Chromecast device to improve the connection. If you were already using it, try removing the HDMI extender to see if that makes a difference.

If you still see a black screen, try the step below. 

Test the Chromecast on another TV, if available

If you have another TV with an HDMI display, try setting up the Chromecast on that TV. 

Are you still having problems? Help the Chromecast team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix. Take the short survey
Black screen + Red/orange (solid) LED light
Try the following: Plug the power cable that came with the Chromecast into a wall outlet and verify that the power cable and power adaptor have a secure connection.
It’s recommended that you use the provided power cable/adaptor that came with the Chromecast.
If you still see a black screen, try the step below.
Power off your TV
  • Shut down the TV completely (power off and disconnect the power cable from the wall socket).
  • Disconnect the Chromecast from the HDMI port and if the Chromecast is plugged into the wall socket, disconnect it.
  • Power on the TV and reconnect the power source to the Chromecast device but do not put the Chromecast into the TV HDMI port.
  • Wait 30 seconds.
  • Plug the Chromecast device into an HDMI port on the TV.
  • Change the TV to the same HDMI input as the Chromecast.
  • If you still see a black screen, try the step below. 
     
Perform a Factory Data Reset (FDR)

Important! Performing a factory data reset should be a last step.

The FDR will reset the Chromecast device to its default factory settings. You will need to set up the device, re-connect to Wi-Fi, and set up your Backdrop settings again (if applicable) after the FDR process is complete. If you've made any changes to your router settings since setting up your Chromecast device, it may affect your ability to set up the device again.

Perform a factory data reset (FDR) of your Chromecast using one of the two methods listed below:

Chromecast (1st Gen) Chromecast (1st generation)
  • While the Chromecast is plugged into the TV, hold down the button on the side of the Chromecast. The LED will begin blinking red. When the LED light turns white, release the button and the Chromecast will begin the reboot sequence.
Chromecast (2nd generation), Chromecast and Chromecast Ultra
  • While the Chromecast is plugged into the TV, hold down the button on the side of the Chromecast. The LED will begin blinking orange. When the LED light turns white, release the button and the Chromecast will begin the reboot sequence.
Black screen + Red/orange (blinking) LED light
Power off your TV
  • Shut down the TV completely (power off and disconnect the power cable from the wall socket).
  • Disconnect the Chromecast from the HDMI port and if the Chromecast is plugged into the wall socket, disconnect it.
  • Power on the TV and reconnect the power source to the Chromecast device but do not put the Chromecast into the TV HDMI port.
  • Wait 30 seconds.
  • Plug the Chromecast device into an HDMI port on the TV.
  • Change the TV to the same HDMI input as the Chromecast.
  • If you still aren't getting a signal, try the step below. 
Use the HDMI extender provided with the Chromecast in a new HDMI port on the TV

Use the HDMI extender that came with the Chromecast device to improve connection. If you were already using it, try removing the HDMI extender to see if that makes a difference.

If you still aren't getting a signal, try the step below. 

Test the Chromecast on another HDMI TV

If you have another HDMI TV, try setting up your Chromecast on that TV.

Are you still having problems? Help the Chromecast team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix. Take the short survey
Black screen + NO LED light

If you have tried powering the Chromecast from both the wall socket and from the USB port and have no LED light on the device:

  1. Make sure that the socket/USB port is functional for other devices (for example: try plugging in your phone to the socket or USB and see if it charges).
  2. Try powering the Chromecast from another power source (i.e. wall socket).
  3. Try a different power cable (USB-to-micro-USB cable and adaptor) than the one that came in the box with the Chromecast device.
"Chromecast...", followed by the spinning Chrome logo, followed by black screen
Power off your TV
  • Shut down the TV completely (power off and disconnect the power cable from the wall socket).
  • Disconnect the Chromecast from the HDMI port and if the Chromecast is plugged into the wall socket, disconnect it.
  • Power on the TV and reconnect the power source to the Chromecast device but do not put the Chromecast into the TV HDMI port.
  • Wait 30 seconds.
  • Plug the Chromecast device into an HDMI port on the TV.
  • Change the TV to the same HDMI input as the Chromecast.
  • If you still see a black screen, try the step below. 
Use the HDMI extender provided with the Chromecast in a new HDMI port on the TV

Use the HDMI extender that came with the Chromecast device to improve connection. If you were already using it, try removing the HDMI extender to see if that makes a difference.

If you still see a black screen, try the step below. 

Test the Chromecast on another HDMI TV

If you have another HDMI TV, try setting up the Chromecast on that TV.

Are you still having problems? Help the Chromecast team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix. Take the short survey
"No Signal error message on TV + blinking red/orange LED light"
Power off your TV
  • Shut down the TV completely (power off and disconnect the power cable from the wall socket).
  • Disconnect the Chromecast from the HDMI port and if the Chromecast is plugged into the wall socket, disconnect it.
  • Power on the TV and reconnect the power source to the Chromecast device but do not put the Chromecast into the TV HDMI port.
  • Wait 30 seconds.
  • Plug the Chromecast device into an HDMI port on the TV.
  • Change the TV to the same HDMI input as the Chromecast.
  • If you still aren't getting a signal, try the step below. 
Use the HDMI extender provided with the Chromecast in a new HDMI port on the TV

Use the HDMI extender that came with the Chromecast device to improve connection. If you were already using it, try removing the HDMI extender to see if that makes a difference.

If you still aren't getting a signal, try the step below. 

Test the Chromecast on another HDMI TV

If you have another HDMI TV, try setting up your Chromecast on that TV.

Are you still having problems? Help the Chromecast team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix. Take the short survey

If you're still having trouble setting up your Chromecast, please contact Chromecast Support Team. 

Was this helpful?
How can we improve it?