TV has no signal or only shows a black screen

If your TV screen is black or you're unable to get a signal when you try to set up or use your Chromecast or Google TV Streamer device, try the troubleshooting steps below.

Initial troubleshooting

1. Make sure the Google streaming device is plugged directly into a power source. Use the power cord and adapter that came with the streaming device.
2. Make sure the TV is set to the HDMI input your streaming device is plugged into, for example, HDMI 1 or HDMI 2.
3. If the TV still only shows a black screen, reboot your streaming device: Unplug the streaming device power cord wait one minute plug the cord back in.
   • Note: Make sure to unplug the power cord, not the HDMI cable plugged into the TV.
4. If the TV still only shows a black screen, remove all HDMI devices plugged into the TV, then unplug the TV power cord for 30 minutes.

Next steps

If your screen is still black, follow the steps below.

Chromecast with Google TV or Google TV Streamer

Black screen with HDMI connection

If you get an HDMI error on your Chromecast with Google TV or Google TV Streamer, try these steps:

1. Make sure the HDMI cable fits firmly into the TV's HDMI port.
2. Try a different HDMI input, for example, HDMI 1 or HDMI 2.
3. Use a compatible HDMI extension cable.
   • Note: For Chromecast with Google TV (4K), the extension cable must support 4K and HDMI 2.0 while the Google TV Streamer (4K) needs to use a cable that supports 4K and HDMI 2.1.
4. If you get the HDMI error while using a specific application, make sure the app is updated to the latest version.
5. Make sure your Chromecast with Google TV or Google TV Streamer has the latest firmware version.
6. Make sure your TV has the latest firmware version.

Black screen with HDCP connection

If you get an HDCP error on your Chromecast with Google TV or Google TV Streamer, try these steps:

1. Unplug your Chromecast with Google TV or Google TV Streamer from the TV, AVR, or soundbar.
2. Reboot your Chromecast or Google TV Streamer and the TV, AVR or soundbar.
3. Reconnect Chromecast with Google TV or Google TV Streamer. Make sure the HDMI cable connection fits firmly into the TV's HDMI port.
4. Check whether you can now view your content.

If this issue persists:

1. Try a different HDMI input, for example, HDMI 1 or HDMI 2.
2. If you're using an HDMI switch, AVR, or soundbar, connect your Chromecast with Google TV or Google TV Streamer directly to your TV.
3. Make sure your Chromecast with Google TV or Google TV Streamer has the latest firmware version.
4. Make sure your TV has the latest firmware version.

Black screen or loss of signal with Samsung TV

If you experience a black screen or loss of signal intermittently for a few seconds on your Samsung TV, disable the "HDMI UHD Color" setting on your TV.

Any Google streaming device

Black screen and white (solid or blinking) LED light

Try the following steps:

Turn off your TV

1. Shut down the TV completely by turning off and disconnecting the power cord from the power source.
2. Disconnect the streaming device from the HDMI port. If the streaming device is plugged into the power source, disconnect it.
3. Turn on the TV, then reconnect the power source to the streaming device. Don't put the streaming device into the TV HDMI port.
4. Wait for 30 seconds.
5. Plug the streaming device into an HDMI port on the TV.
6. Change the TV to the same HDMI input as the streaming device.
7. If there are multiple ports available on the TV, try steps 1-6 with a different HDMI port
8. If the TV still only shows a black screen, try the step below.

Test the streaming device on another TV, if available

If you have another TV with an HDMI display, try to set up the Chromecast on that TV.

Are you still having problems? Help Google team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix.

Take the short survey

Black screen and red or orange (solid) LED light

Try the following steps:

Use the power cord that came with the streaming device

It's recommended that you use the provided power cord and adapter that came with the streaming device.

Plug the power cord that came with the streaming device into a power source. Verify that the power cord and power adapter have a secure connection.

If the TV still only shows a black screen, try the step below.

Turn off your TV

1. Shut down the TV completely (turn off and disconnect the power cord from the power source).
2. Disconnect the streaming device from the HDMI port. If the streaming device is plugged into the power source, disconnect it.
3. Turn on the TV and reconnect the power source to the streaming device but do not put the streaming device into the TV HDMI port.
4. Wait for 30 seconds.
5. Plug the streaming device into an HDMI port on the TV.
6. Change the TV to the same HDMI input as the streaming device.
7. If the TV still only shows a black screen, try the step below.

Factory reset your streaming device

Important: Performing a factory reset should be the last step.

When you perform a factory reset, it resets the streaming device device to its default factory settings. You'll need to set up the device, reconnect to Wi-Fi, and set up your Ambient Screensaver settings again (if applicable). If you've made any changes to your router settings since setting up your streaming device, it may affect your ability to set up the device again.

You can perform a factory reset on your Chromecast using one of the 2 methods listed below.

Important: This action clears your data and can't be undone.

 

Google TV Streamer (4K)

With the Google TV Streamer Voice Remote

1. At the top right of your TV screen, select your profile All settings .
2. Select System About Factory Reset.

From the Google TV Streamer device

1. While the device is plugged into the TV and powered on, press and hold the button for 10-12 seconds on the back of the device. The LED should start to blink yellow .
2. When the LED light turns solid white, release the button, and the device should then reset.

Chromecast with Google TV

With the Chromecast Voice Remote

1. At the top right of your TV screen, select your profile All settings .
2. Select System About Factory Reset.

From the Chromecast device

1. While the Chromecast is plugged into the TV and powered, press and hold the button on the back of the Chromecast. The LED should start to blink yellow.
2. When the LED light turns solid white, release the button, and the Chromecast should then reset.

Chromecast (2nd gen), Chromecast (3rd gen), or Chromecast Ultra

From the Google Home app

Note: This option is only available if you're on the same network your Chromecast was set up on.

1. Open the Google Home app .
2. Tap and hold your device's tile.
3. At the top right, tap Settings   More   Factory reset  Factory reset.

From the Chromecast device

1. While the Chromecast is plugged into the TV and powered, hold down the button on the side of the Chromecast.
2. The LED should begin to blink orange. When the LED light turns solid white, release the button and the Chromecast should then restart.

Chromecast (1st gen)

From the Google Home app

Note: This option is only available if you're on the same network your Chromecast was set up on.

1. Open the Google Home app .
2. Tap and hold your device's tile.
3. At the top right, tap Settings   More   Factory reset  Factory reset.

From the Chromecast device

1. While the Chromecast is plugged into the TV and powered, hold down the button on the Chromecast device for at least 25 seconds or until the solid LED light flashes red.
2. Once the LED light blinks white and the TV goes blank, release the button. The device should then restart.

Note: Support for Chromecast (1st gen) has ended, which means it no longer receives software or security updates, and Google doesn't provide technical support. Users may notice a degradation in performance.

Chromecast Audio

From the Google Home app

1. Open the Google Home app .
2. Tap and hold your device's tile.
3. At the top right, tap Settings   More   Factory reset  Factory reset.

From the Chromecast Audio device

While the Chromecast Audio is plugged in, hold down the button on the side of the Chromecast Audio. The LED will begin blinking orange. When the LED light turns white, release the button and the Chromecast Audio will begin the reboot sequence.

Black screen and red or orange (blinking) LED light

Turn off your TV

1. Shut down the TV completely (turn off and disconnect the power cord from the power source).
2. Disconnect the streaming device from the HDMI port. If the streaming device is plugged into the power source, disconnect it.
3. Turn on the TV and reconnect the power source to the streaming device but do not put the streaming device into the TV HDMI port.
4. Wait for 30 seconds.
5. Plug the streaming device into an HDMI port on the TV.
6. Change the TV to the same HDMI input as the streaming device.
7. If you still aren't getting a signal, try the step below.

Test the streaming device on another HDMI TV

If you have another HDMI TV, try to set up your Chromecast on that TV.

Are you still having problems? Help Google team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix.

Take the short survey

Black screen with no LED light

If you have tried to power the streaming device from both the power source and from the USB port, and have no LED light on the device:

1. Make sure the USB port is functional for other streaming devices (Example: try to plug in your phone to the outlet or USB and check if it charges).
2. Try to turn on the streaming device from another power source (Example: wall outlet).
3. Try a different power cord (USB-to-micro-USB cable and adapter) than the one that came in the box with the streaming device.

"Google TV...," followed by the spinning Chrome logo

If your TV shows "Google TV...," followed by the spinning Chrome logo, and then followed by a black screen, follow the steps below:

Turn off your TV

1. Shut down the TV completely (turn off and disconnect the power cord from the power source).
2. Disconnect the streaming device from the HDMI port. If the streaming device is plugged into the power source, disconnect it.
3. Turn on the TV and reconnect the power source to the streaming device but do not put the Chromecast into the TV HDMI port.
4. Wait for 30 seconds.
5. Plug the streaming device into an HDMI port on the TV.
6. Change the TV to the same HDMI input as the streaming device.
7. If the TV still only shows a black screen, try the step below.

Test the streaming device on another HDMI TV

If you have another HDMI TV, try to set up your streaming device on that TV.

Are you still having problems? Help Google team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix.

Take the short survey

No signal error and blinking red or orange LED light

Turn off your TV

1. Shut down the TV completely (turn off and disconnect the power cord from the power source).
2. Disconnect the streaming device from the HDMI port and if the streaming device is plugged into the power source, disconnect it.
3. Turn on the TV and reconnect the power source to the streaming device but do not put the streaming device into the TV HDMI port.
4. Wait 30 seconds.
5. Plug the streaming device into an HDMI port on the TV.
6. Change the TV to the same HDMI input as the streaming device.
7. If you still aren't getting a signal, try the step below.

Test the streaming device on another HDMI TV

If you have another HDMI TV, try to set up your streaming device on that TV.

Are you still having problems? Help Google team better understand what you're experiencing by completing this short survey and feedback report. Your input will help our engineers investigate and find a fix.

Take the short survey

If you're still having trouble setting up your streaming device, contact us for help.