Safety, Warranty & Regulatory Guide for Google Pixel Buds 2a

Where to find product information

This guide includes the basic safety guidelines in the printed Safety & Warranty booklet that comes enclosed with your Google Pixel Buds 2a. It also includes additional safety, regulatory, and warranty information about Google Pixel Buds 2a.

Safety, and regulatory information: g.co/pixelbuds/regulatory OR in the Settings for your Pixel Buds at More Settings Safety, warranty & regulatory

Warranty details for your country of purchase, including instructions for making a claim: g.co/devicewarranty

Eco-design (energy performance) information: g.co/ecodesign

Google Pixel Buds 2a help: g.co/pixelbudspro/help

Safety Warnings

WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO YOUR DEVICE, ACCESSORIES OR ANY CONNECTED DEVICES, AND OTHER POTENTIAL HAZARDS

HANDLING

Handle your Google Pixel Buds 2a with care. You may damage the device or the batteries if you disassemble, drop, bend, burn, crush or puncture your device. Do not use a device with a damaged enclosure or some other form of physical damage. Using a damaged device may cause overheating or injury. Do not expose your Google Pixel Buds 2a to liquids, which can cause a short circuit and overheating. If your device gets wet, do not attempt to dry it using an external heat source.

Your Google Pixel Buds 2a is designed to operate in a dry, indoor environment. Your device works best in ambient temperatures between 32° and 95° F (0° and 35° C), and should be stored between ambient temperatures of -4° and 113° F (-20° and 45° C). Do not expose your device to temperatures above 113° F (45° C), such as on a car dashboard or near a heating vent, as this may damage the device, overheat the battery, or pose a risk of fire. Keep your device away from heat sources and out of direct sunlight. If your device becomes too hot, disconnect it from its power source if it is plugged in, move it to a cooler place and do not use it until it has cooled. Your device is designed to work best at an altitude of up to 16404 ft (5000m).

REPAIR & SERVICE

Self service repair is not recommended unless you are an adult with the technical expertise to safely repair electronic devices. If you choose to perform self repair, you agree to assume the risk associated with such repair. Use caution if engaging in repair. Opening and/or repairing your device can present electric shock, device damage, fire and personal injury risks and other hazards. Disassembling the device may result in loss of water or dust resistance or cause injury or damage to your device. For example, the device contains a laser that can be damaged during disassembly which might expose you to hazardous laser emissions which are not visible.

Contact customer service if your Google Pixel Buds 2a is not working properly or has been damaged. For more information, visit g.co/pixelbudsaseries/help

CHARGING

Be sure the Google Pixel Buds 2a and power adapter are well ventilated when in use or charging. Using damaged cables, chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the device or other property. Do not charge your device when it’s wet. Avoid charging your device in direct sunlight.

When charging the device, make sure the power adapter is plugged into a power outlet near the device and is easily accessible. Do not force this power adapter and other plugs or power adapters to a power outlet if space is not sufficient to accommodate both. When disconnecting the power adapter from a power outlet, pull on the adapter, never on the charging cable. Do not twist or pinch the cable, and do not force a connector into a port. Before attempting to charge again, make sure both the charging cable connector and the device's charging port are dry and clear of any objects.

Only charge your Google Pixel Buds 2a with a compatible USB-C PD compliant charger or a USB-C charger available on the Google Store or at Google authorized resellers (look for Google’s “made for” badge). The AC adapter must be certified with a Limited Power Source output per IEC 60950-1 and/or classified PS2 per IEC 62368-1, rated: 5 Volts DC, maximum 3 Amp; 9 Volts DC, maximum 2 Amp; or both. Failure to use compatible charging accessories can cause fire, electric shock, injury, or damage to the device and the accessories.

PROLONGED HEAT EXPOSURE

The Google Pixel Buds 2a and its charging generate heat during normal operation and comply with applicable surface temperature standards and limits. Avoid prolonged skin contact when the device is charging because exposing skin to hot surfaces for a long period of time may cause discomfort or burns. Do not sleep on or with your device or its power adapter, or cover them with a blanket or pillow. Be aware of this issue if you have a physical condition that affects your ability to detect heat against your skin.

CHILD SAFETY

This device is not a toy. Your Google Pixel Buds 2a may contain (or may come with) small parts, cables, metal elements, or parts with sharp edges that may cause an injury or create a choking or strangulation hazard. Children have strangled on cords and cables. Keep the Google Pixel Buds 2a and its accessories, including cords and cables, out of the reach of children (more than 3 feet (0.9 meters) away) and do not allow them to play with the Google Pixel Buds 2a and its accessories. They could hurt themselves or others, or could accidentally damage the Google Pixel Buds 2a . Seek medical attention immediately if small parts are swallowed or injury occurs.

HEARING LOSS

Prolonged exposure to loud sounds (including music) can cause hearing loss. To prevent possible hearing damage, avoid listening at high volume for prolonged periods of time. Continued exposure to high volumes and background noise can make loud sounds seem quieter than they actually are. Check the volume before using headphones or earphones.

ENVIRONMENTAL AWARENESS

Do not use your earbuds with active noise cancellation enabled in environments where lack of awareness of ambient noise can lead to hazards, such as while driving, biking, or walking in traffic or near construction zones.

BATTERY

This device contains a rechargeable lithium-ion battery, which is a sensitive component that can cause injury if damaged. Google recommends that you seek professional assistance for any device repairs, and use authentic Google replacement parts, if available in your region. Self service repair (including removing and/or replacing the battery) is not recommended unless you are an adult with the technical expertise to safely repair electronic devices. If you choose to perform self repair, you agree to assume the risk associated with such repair. Use caution if engaging in repair. Opening and/or repairing your device can present electric shock, device damage, fire and personal injury risk, and other hazards. To replace the battery, contacting Google, a Google service provider or an independent repair professional are recommended. For contact information, visit g.co/pixelbuds/repair.

Models: G3UGY, G76LT
Chongqing VDL Electronics Co., Ltd.
Google 1600 Amphitheatre Parkway, Mountain View, CA 94043 US
Web: g.co/regulatory
Battery model ID: 1254S5
Weight: 1.7 g, Capacity: 77 mAh, RECHARGEABLE, Lithium-Ion, Extinguishing agent: Dry Powder, CO2, Hazardous substances: Nickel, Critical Raw Materials: Aluminum, Cobalt, Copper, Lithium, Graphite, Made in China

Models: GNN2Z
Chongqing VDL Electronics Co., Ltd.
Google 1600 Amphitheatre Parkway, Mountain View, CA 94043 US
Web: g.co/regulatory
Battery model ID: GD6RL
Weight: 7.3 g, Capacity: 399 mAh, RECHARGEABLE, Lithium-Ion, Extinguishing agent: Dry Powder, CO2 Hazardous substances: Nickel, Critical Raw Materials: Aluminum, Cobalt, Copper, Lithium, Graphite, Nickel, Made in China

Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards.

WARNING: This device contains coin cell batteries which are sensitive components that can cause injury if damaged or ingested. Keep away from children. These batteries are hazardous to young children. If ingested or placed inside any part of the body, seek medical attention immediately. Swallowing or insertion may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforations of the esophagus. If you suspect your child has swallowed or inserted a battery, seek immediate medical attention. Examine the device(s) and make sure the battery compartment is correctly secured. If the battery compartment does not close securely, stop using the product and keep it away from children. Dispose of used batteries immediately and safely.

Only use a battery for the Google Pixel Buds 2a for which it is specified. Use of a non-qualified and/or damaged battery or improper disposal may present a risk of fire, explosion, leakage and/or other hazards. Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards. Replace all batteries at the same time, do not reuse any old batteries. Do not short circuit the battery or allow metallic or conductive objects to contact the battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and you suspect or observe damage, contact Google or a Google authorized service provider for inspection. If the battery leaks, do not allow the leaking fluid to come into contact with eyes, skin, or clothing. If the fluid is already in contact with the eyes, do not rub them. Rinse the eyes with clean water immediately and seek medical advice.

It is not obvious when a button or coin battery is stuck in a child’s esophagus (food pipe). If the child vomits fresh (bright red) blood, seek immediate medical help. Other symptoms may vary or fluctuate. The child might:

Cough, gag or drool a lot,
Appear to have an upset stomach or a virus,
Be sick,
Point to their throat or stomach,
Have pain in their abdomen, chest or throat,
Be tired or lethargic,
Be quieter or more clingy than usual or otherwise “not themselves”,
Lose their appetite or have a reduced appetite, and
Not want to eat solid food or be unable to eat solid food.
Pixel Buds 2a contains coin cell batteries:
- 1254S5 operating at a nominal 3.85V

DISPOSAL, TRANSPORTATION, & RECYCLING

Dispose of and transport your device, batteries and accessories according to local environmental and transportation regulations. Do not improperly transport them or dispose of them in normal household waste. Improper disposal or transport may lead to fire, explosion, and/or other hazards. Do not open, crush, heat above 113°F (45°C), or incinerate. For more information on recycling your device, batteries and accessories, visit g.co/HWRecyclingProgram

ENVIRONMENTAL RESTRICTIONS

To prevent damage to your device parts or internal circuits, do not use or store the device or its accessories in dusty, smoky, damp, or dirty environments, or near magnetic fields. Keep it away from heat sources and out of direct sunlight. Do not leave your device inside a vehicle or in places where the temperature may exceed 113° F (45° C) , such as on a car dashboard, window sill, near a heating vent, or behind glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the device, overheat the battery, or pose a risk of fire or explosion.

EXPLOSIVE ATMOSPHERES

Do not charge, use, store, or transport your device where flammables or explosives are stored (e.g., in gas stations, fuel depots, or chemical plants). Do not use your device where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, fuel, or chemical transfer or storage areas, and in areas where the air contains chemicals, vapors, or particles (such as grain, dust, or metal powders). Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might exist.

RADIO FREQUENCY EXPOSURE

This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the applicable emission limits for exposure to radio frequency (RF) energy.

In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue, the highest SAR value for this device type is 0.71 W/kg when used against the head with no separation. In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue, the highest SAR value for this device type is 0.26 W/kg when used against the head with no separation.

You can find additional information about SAR at the following pages:

fcc.gov
icnirp.org
ec.europa.eu
dot.gov.in

RADIO FREQUENCY INTERFERENCE

Observe rules that prohibit the use of wireless technology (e.g. cellular or Wi-Fi). Your device is designed to comply with regulations governing radio frequency emissions but use of wireless devices can negatively affect other electronic equipment. For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. You may be able to use your device in airplane mode.

MEDICAL DEVICE INTERFERENCE

Your device uses radios and other components that emit electromagnetic fields, and also contains magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and other implanted medical devices. Always keep your Google Pixel Buds 2a and its charger at a safe distance away from the medical device. If you have questions about using your Google device with or near your medical device, consult your healthcare provider before using your Google Pixel Buds 2a. If you suspect your Google Pixel Buds 2a is interfering with your medical device, turn off your Google device and consult your physician for information specific to your medical device.

SKIN IRRITATION

Some people may experience reactions to materials, such as nickel or latex, found in items that are in extended contact with the skin. This can be due to allergies, the presence of skin irritants (like soap, sunscreen or sweat), or other causes. Keep your Google Pixel buds 2a clean and dry. Periodically remove the device for an hour after extended wear to reduce the chance of skin irritation. Remove the device, stop use and consult a physician if you experience skin irritation or if the device causes any discomfort. For more information visit g.co/pixelbuds/clean.

CONSUMER LASER PRODUCT

Caution - Your Google Pixel Buds 2a contains a Class 1 laser module. The design of the device incorporates optics and protective housing such that there is no access to a level of laser radiation above Class 1. Laser modules in this product comply with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Since the laser could be damaged during repair or disassembly, which could result in hazardous exposure to infrared laser emissions that are not visible, this product should be serviced by Google or an authorized service provider.

Laser Module: Made in Austria. ams-OSRAM AG, Tobelbader Str. 30, 8141 Premstaetten, Austria

Proper Handling and Usage

Follow these guidelines when using, storing or cleaning of your Pixel Buds 2a.

OPERATING TEMPERATURE

Do not use or charge the device, at ambient temperatures lower than 0°C (32°F) or higher than 35°C (95°F). If the interior temperature of the device exceeds normal operating temperatures, you may experience the following behaviors while the device tries to regulate its temperature: reduced performance and connectivity, inability to charge, or powering down of the display or device power down. You may not be able to use the device while it regulates its temperature. Move the device to a cooler (or warmer) location and wait a few minutes before attempting to use it again.

CARE & CLEANING

Unplug your Google Pixel Buds 2a and charger before cleaning, during lightning storms, or when unused for extended periods of time. Do not clean your device while it is charging as this may cause injury or damage to your device. Avoid solvent and abrasive material that may cause damage to the product surface. Do not use any chemical detergent, powder, or other chemical agents (such as benzene) to clean your device or accessories.

Exposure to makeup, chemicals, and dyed materials such as denim can stain light colored devices.

To clean your device we recommend gently wiping it with a soft, lint-free cloth. Use a dry cloth for streaks, smudges or dust and a slightly damp (not wet) cloth for color transfers such as from makeup or a new pair of jeans. For care and cleaning instructions see g.co/pixelbuds/clean.

To disinfect your device, you can use ordinary household disinfecting wipes or 70% isopropyl alcohol-based wipes. Do not use wipes that have bleach.

WATER AND DUST RESISTANCE

Your Google Pixel Buds 2a are designed to comply with dust and water protection rating IP54 (Buds Only) and IPX4 (Case Only) under IEC 60529 standard when it leaves the factory, but it is not dust proof or water proof. Dust and water resistance are not permanent conditions and are diminished or lost over time due to normal wear and tear, device repair, disassembly, or damage. Dropping your device may result in loss of dust or water resistance. Liquid damage voids the Limited Warranty (see below or visit g.co/devicewarranty). Do not expose your device or other accessories to liquids or to dust, which can cause a short circuit and/or overheating. The charging case and other accessories are not dust or water resistant and should not be exposed to either.

MAGNETIC FIELDS

Avoid placing any items containing magnets or which are sensitive to magnetism, such as credit cards, bank cards, audio/video tapes, or magnetic memory devices, near this device or its charging case, because you may lose information stored on such items. Items containing information sensitive to magnets should be kept at least 2 inches (5 cm) away from this device.

Service & Support

Unauthorized repairs or modifications could result in permanent damage to the device, and may affect your warranty coverage and regulatory authorizations. Google Pixel Buds 2a should only be repaired by Google or a Google authorized service provider. Contact customer service for authorized service.

Repairs or modifications made without sufficient technical expertise could result in permanent damage to the device or injury. Google recommends that you seek professional assistance for any device repairs. Contact customer service for alternative repair service options.

If you send your device in for service, you might receive a replacement in place of your original device. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. If the goods are capable of retaining user-generated data then the repair or replacement may result in loss of the data. For online help and support, visit g.co/pixelbuds/help

Regulatory Information

Regulatory information, certification, and compliance marks specific to Google Pixel Buds 2a can be found in this document, inside the charging case, on the product packaging, or as applicable, on paired Pixel phones running Android 10 or newer under Settings > Connected devices > Pixel Buds 2a > More Settings > Safety, warranty & regulatory, or on other paired phones in the Pixel Buds app under More Settings > Safety, warranty & regulatory. Additional regulatory and environmental information can be found at g.co/pixelbuds/regulatory.

Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States.

EMC COMPLIANCE STATEMENT

Important: This device, power adapter and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices

Regulatory Information: United States

FCC REGULATORY COMPLIANCE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

These devices may not cause harmful interference.
These devices must accept any interference received, including interference that may cause undesired operation.

Model number: GNN2Z, G76LT, G3UGY

FCC ID:

Left Earbud: SZGG3UGY

Right Earbud: SZGG76LT

Charging Case: SZGGNN2Z

Product name: Google Pixel Buds 2a

US Responsible Party
Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043
Contact: g.co/pixel/contact

Regulatory Information: Canada

INDUSTRY CANADA, CLASS B

This device complies with ICES-003 Class B limits.

Google Pixel Buds 2a complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC:
Left Earbud: 7702A-G3UGY;
Right Earbud:: 7702A-G76LT;
Charging Case: 7702A-GNN2Z

UK COMPLIANCE NOTICE

The CE marking on this device satisfies the requirements of applicable UK regulations.

INFORMATION ON FREQUENCY BANDS AND WIRELESS OUTPUT POWER

Earbuds:

Frequency	Power
Bluetooth: 2 400-2 483,5 MHz	< 10 dBm

Charging Case:

Frequency	Power
Bluetooth: 2 400-2 483,5 MHz	< 10 dBm

Google Commerce Limited UK Establishment, 1 St. Giles High Street, London, WC2H 8AG, United Kingdom.

ROHS COMPLIANCE

This product is in compliance with Statutory Instrument 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substance in Electrical and Electronic Equipment Regulations.

UK REACH

UK REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, Statutory Instrument 2020 No. 1577) is the UK chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) AND BATTERIES

The WEEE symbol above means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources, protect human health, and help the environment.

Manufacturer: Google LLC 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States.

Google Commerce Limited UK establishment, Belgrave House, 76 Buckingham Palace Road, London, SW1W 9TQ.

Regulatory Information: EU

EU COMPLIANCE NOTICE

Hereby, Google LLC declares that radio equipment type: G3UGY, G76LT and GNN2Z is in compliance with Directive 2014/53/EU (Radio Equipment Directive). The full declaration of conformity may be found at g.co/pixelbuds/conformity.

European Conformity

INFORMATION ON FREQUENCY BANDS AND WIRELESS OUTPUT POWER

European Union

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Earbuds:

Frequency	Power
Bluetooth: 2 400-2 483,5 MHz	< 10 dBm

Charging Case:

Frequency	Power
Bluetooth: 2 400-2 483,5 MHz	< 10 dBm

RADIO FREQUENCY INTERFERENCE

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

SPECIFIC ABSORPTION RATE (SAR) INFORMATION

Google Pixel Buds 2a complies with radio frequency specifications when used against head with no separation, limited to 2 W/kg, averaged over 10 grams of tissue.

For the Google Pixel Buds 2a, the highest Specific Absorption Rate (SAR) values reported for this device type is head : 0.26 W/kg, when tested at the ear, at a distance of 0 mm.

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) AND BATTERIES

ADDITIONAL REGULATORY INFORMATION: GERMANY

§ 10 I 2 ElektroG: Vor der Entsorgung dieses Geräts (i) Altbatterien/-akkus, sofern sie nicht vom Gerät umschlossen sind, und zerstörungsfrei entnehmbare Lampen zerstörungsfrei trennen und (ii) alle personenbezogenen Daten löschen. § 17 I und II ElektroG: Viele Vertreiber müssen Altgeräte kostenlos zurücknehmen.

ADDITIONAL REGULATORY INFORMATION: FRANCE

INFORMAZIONI SULLO SMISTAMENTO DEGLI IMBALLAGGI - ITALIA

RACCOLTA DIFFERENZIATA
Scatole, Astuccio, Vassoio preformato, Gancio da esposizione	Carta	PAP 21
Involucro del prodotto, Involucro delle istruzioni	Carta	PAP 22
Verifica le disposizioni del tuo Comune sullo smaltimento dei rifiuti.

ROHS COMPLIANCE

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

REACH

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com.

Manufacturer: Google LLC 1600 Amphitheatre Parkway, Mountain View, CA 94043 United States.

Google Commerce Limited, 70 Sir John Rogerson’s Quay, Dublin 2, D02 R296, Ireland.

COMMON CHARGER DIRECTIVE

The power delivered by the charger must be between min 2.5 Watts required by the radio equipment, and max 2.5 Watts in order to achieve the maximum charging speed.

ECODESIGN FOR ENERGY-RELATED PRODUCTS COMMISSION REGULATION (EU) 2023/826

See Ecodesign Test Summary report at g.co/ecodesign

Regulatory Information: Australia

If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Center on 13 11 26 for fast, expert advice.

Regulatory Information: Singapore

Regulatory Information: Japan

Left ear:

003-250008

P250013003

Right ear:

003-250009

P250014003

Charging Case:

003-250010

This is a Class B equipment. Although this equipment is intended for use in a residential environment, it could cause poor reception if used near a radio or a television receiver. Please follow instructions in the instruction manual.

VCCI-B

Regulatory Information: India

INDIA RECYCLING, E-WASTE MANAGEMENT AND HANDLING STATEMENT

In India, this label indicates that this product should not be thrown away with household, commercial and industrial waste. It should be deposited at an appropriate facility to allow recovery and recycling.

Google declares that your device has been designed and manufactured in compliance with E-Waste (Management) Rules, 2022 (hereafter "the Rules"), and is specifically in compliance with Rule 16 (1) on the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their maximum allowed concentrations by weight in the homogenous materials (except for the exemptions listed in schedule II).

Improper handling, disposal, accidental breakage, damage or improper recycling of e-waste may present risks, including, but not limited to, fire, explosion and/or other hazards, and uncontrolled waste disposal which may be detrimental to/have adverse effects on the environment as it prevents reuse of resources. Some e-waste may contain hazardous chemicals which, if disposed improperly, may make water, soil and other natural resources toxic. Improper disposal may cause harm to plant, animal and human life.

Regulatory Information: Taiwan

台灣法規遵循

減少電磁波影響，請妥適使用

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

TAIWAN ROHS

Equipment Name: Wireless Earbuds , Type designation: G3UGY, G76LT 設備名稱：無線耳機，型號（型式）：G3UGY, G76LT
Unit	限用物質及其化學符號 Restricted Substances and its chemical symbols
Unit	鉛Lead (Pb)	汞Mercury (Hg)	鎘Cadmium (Cd)	六價鉻Hexavalent chromium (Cr+6)	多溴聯苯Polybrominated biphenyls (PBB)	多溴二苯醚Polybrominated diphenyl ethers (PBDE)
外殼 Enclosure	O	O	O	O	O	O
電子元件 Electronic Component	－	O	O	O	O	O
連接器 Connector	－	O	O	O	O	O
印刷電路板 PCB	O	O	O	O	O	O
包裝 Packaging	O	O	O	O	O	O
其它 Other	O	O	O	O	O	O
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。 Note 1: "Exceeding 0.1 wt%" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2: "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.〝－〞係指該項限用物質為排除項目。 Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Regulatory Information: Mexico

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada

Modelo No.: G3UGY and G76LT

Características eléctricas: 4.65Vdc, 200mA

Modelo No.: GNN2Z

Características eléctricas: 5Vdc, 500mA

Earbuds:

IFTCOGOG325-13519

Charging case:

IFTCOGOGN25-13517

Regulatory Information: Malaysia

Limited Warranty

The limited warranty is available in the Google Hardware Warranty Center.

Pixel, G logo, Google, Android, and related marks and logos are trademarks of Google LLC

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other trademarks are the property of their respective owners.