Notification

Our software update is being released in phases. New features will gradually roll out across all regions. Stay tuned for updates.

Safety & regulatory manual (Pixel Stand)

Basic safety

Caution WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO YOUR PHONE AND OTHER POTENTIAL HAZARDS

To avoid damaging your device, accessories or any connected devices, and to reduce the risk of
personal injury, discomfort, property damage or other potential hazards, follow the precautions
below.

  • Handle your Pixel Stand with care. You may damage the device if you disassemble, drop, bend, burn, crush or puncture your device. Using a damaged device may cause overheating or injury. Don’t expose your Pixel Stand to liquids, which can cause a short circuit and overheating. If it gets wet, do not attempt to dry it using an external heat source. The Pixel Stand is designed to work best in ambient temperatures between 0°C and 35°C, and should be stored between ambient temperatures of -20°C and 45°C. Do not expose your Pixel Stand to temperatures above 45°C as this may damage the product and pose a risk of fire. Avoid using the wireless charger in direct sunlight.
  • Make sure that the power adaptor and Pixel Stand are well ventilated when in use or charging. Using damaged cables or power adaptors, or charging when moisture is present, can cause fire, electric shock, injury or damage to the wireless charger or other property. When powering the wireless charger, make sure that the power adaptor is plugged into a socket near the wireless charger and is easily accessible. This product is intended for use with a certified Limited Power Source (LPS) per IEC 60950-1 rated: 5 Volts DC, maximum 3 Amp; 9 Volts DC, maximum 2 Amp; or both. Only power your wireless charger with the included power adaptor and cable, or compatible charging accessories available on the Google Store. Failure to use compatible charging accessories can cause fire, electric shock, injury or damage to the wireless charger.

  • Your Pixel Stand may charge any Qi-compliant power receiver or phone. Do not place metallic or magnetic foreign objects between the wireless charger and the power receiver or phone, as this could cause heating of the foreign object or cause the device not to charge properly. Examples of these objects include coins, jewellery and credit cards. If using a phone case that is metallic or magnetic, remove the case prior to wireless charging as this may cause the device or charger to overheat or cause the device not to charge properly.

Proper handling and usage

Do not plug any cables, cords, adaptors or other objects into the phone’s USB port while charging wirelessly.


Maintain a distance of 20 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements.

Service and support

For online help and support, visit g.co/pixelstand/help. For customer service, visit g.co/pixelstand/support

Manufacturer’s address

Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, 94043.

FCC and ISED regulatory compliance

This device complies with Innovation, Science and Economic Development Canada (ISED) licence-exempt RSS standard(s). This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

EMC compliance

Important: This device and power adaptor have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions and other electronic devices. Changes or modifications to this product not authorised by Google could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.

Pixel, Google, G logo, Pixel Stand, and related marks and logos are trademarks of Google LLC.
Pixel Stand is designed by Google and assembled in China.

EU Compliance Notice

Declaration of Conformity

Declaration of Conformity (page 1 of 2)

Regulatory > Declaration of Conformity 2018 > Page 1 (English)

Declaration of Conformity (page 2 of 2)

Regulatory > Declaration of Conformity 2018 > Page 2 (English)

true
Search
Clear search
Close search
Google apps
Main menu