Where to find product information
Where to find product information
This guide includes the basic safety guidelines in the printed Safety and warranty booklet that comes with your device. It also includes additional safety, regulatory and warranty information about the device.
Safety and regulatory information: g.co/pixel/safety or Settings 
Warranty details for your country of purchase, including instructions for making a claim: g.co/pixel/warranty
Electronic regulatory labels (and Specific Absorption Rate (SAR) values) for your device: Settings
Eco-design (energy performance) information: g.co/ecodesign
Help with your device: g.co/pixel/help
Patents
For information, visit g.co/patents.
Safety warnings
 |
WARNING: HEALTH AND SAFETY INFORMATION. READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE (INCLUDING DAMAGE TO YOUR DEVICE, ACCESSORIES OR ANY CONNECTED DEVICES) AND OTHER POTENTIAL HAZARDS |
Handling
Handle your device with care. You may damage the device or the batteries if you disassemble, drop, bend, burn, crush or puncture your device. Do not use a device with a damaged enclosure, a cracked screen or some other form of physical damage. Using a damaged device may cause overheating or injury. Do not expose your device to liquids, which can cause a short circuit and overheating. If your device gets wet, do not attempt to dry it using an external heat source.
Use of your device in certain modes, such as gaming, taking videos, using a torch setting, or virtual reality or augmented reality features, can cause it to generate more heat than it would under normal operating conditions. This may cause your device to operate in a reduced-power mode or shut down temporarily. Use extra care when operating the device in these modes. For more information on risks associated with prolonged heat exposure, please refer to the Prolonged heat exposure section below.
Child safety
This device is not a toy. Your device may contain (or may come with) small parts, plastic, cables, glass or metal elements, and parts with sharp edges that may cause an injury or create a choking or strangulation hazard. Children have been strangled on cords and cables. Keep the device and its accessories, including cords and cables, out of the reach of children (more than 0.9 m (3 ft) away) and do not allow them to play with the device and its accessories. They could hurt themselves or others, or could accidentally damage the device. Seek medical attention immediately if small parts are swallowed or injury occurs.
Environmental restrictions
Your device works best in ambient temperatures between 0° and 35°C (32° and 95°F), and should be stored between ambient temperatures of -20° and 45°C (-4° and 113°F). Do not leave your device inside a vehicle or in places where the temperature may exceed 45°C (113°F), such as on a car dashboard or window sill, near a radiator, or behind glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the device, overheat the battery or pose a risk of fire or explosion. Keep your device away from heat sources and out of direct sunlight.
If the temperature of the device exceeds normal operating temperatures, you may experience the following behaviours while the device tries to regulate its temperature: reduced performance and connectivity, inability to charge, powering down of the display or device power down. You may not be able to use the device while it regulates its temperature. Disconnect the device from its power source if it is plugged in, move the device to a cooler (or warmer) location and wait a few minutes before attempting to use it again. Do not open or close your device in extremely cold temperatures of -20°C (-4°F) or lower, as it may damage the device.
To prevent damage to your device parts or internal circuits, do not use or store the device or its accessories in dusty, smoky, damp, dirty environments, near magnetic fields or combustible gas.
Your device is designed to work best at an altitude of up to 5,000 m (16,404 ft).
Explosive atmospheres
Do not charge, use, store or transport your device where flammables or explosives are stored (e.g. in petrol stations, fuel depots or chemical plants). Do not use your device where blasting operations are in progress or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, in fuel or chemical transfer or storage areas and in areas where the air contains chemicals, vapours or particles (such as grain, dust or metal powders). Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might exist.
Navigation
Your device can access mapping and navigation services. Maps and navigation depend on a working data connection and location services, and may not be available at all times or in all areas. Maps and directions may be inaccurate and actual conditions may differ from the map, data, traffic, directions, content and other results. Carefully review directions, follow all applicable traffic laws and signs, exercise your independent judgment and apply common sense, and use mapping and navigation services at your own risk. You are responsible at all times for your conduct and its consequences. Navigation with AR requires up-to-date Google Street View imagery and bright outdoor light, and isn't available in India.
Distraction
Using your device when performing certain activities can distract you and may cause a dangerous situation for you or others. To reduce the risk of accidents (and because it’s prohibited by law in many places), do not use your device while driving, cycling, operating machinery or engaging in any activities that have potentially serious consequences. Follow local laws about using mobile devices, headphones and helmets.
Hearing loss
 |
Prolonged exposure to loud sounds (including music) can cause hearing loss. To prevent possible hearing damage, avoid listening at a high volume for prolonged periods of time. Continued exposure to high volumes and background noise can make loud sounds seem quieter than they actually are. Check the volume before using headphones or earphones. |
Prolonged heat exposure
The device and its charger generate heat during normal operation, and comply with applicable surface-temperature standards and limits. Avoid prolonged skin contact when the device is in use or charging, because exposing skin to hot surfaces for a long period of time may cause discomfort or burns. Be aware of prolonged skin contact with a device if you have a physical condition that affects your ability to detect heat against your skin. Do not sleep on or with your device or its power adaptor, or cover them with a blanket or pillow.
Musculoskeletal disorders
Repetitive activities, such as typing, tapping or swiping on the screen of your device, may cause discomfort in your fingers, hands, wrists, arms, shoulders or other parts of your body. If you experience any discomfort from such activities, stop using your device and consult with your doctor.
Charging
Make sure that the device and its power adaptor are well ventilated when in use or charging. Using damaged cables or power adaptors, or charging when moisture is present, can cause fire, electric shock, injury or damage to the device or other property. Only charge your device on a hard surface. Do not charge your device on a soft or flammable surface, such as a sofa or bed, or when it’s wet. Avoid charging your device in direct sunlight. Avoid sleeping on a device, power adaptor or wireless charger, or placing them under a blanket, pillow or your body when they are connected to a power source, as these situations can result in personal injury or fire.
When charging the device, make sure that the power adaptor is plugged into a power socket near the device and is easily accessible. Do not force the power adaptor and other plugs or power adaptors into a power socket if there is not enough space to accommodate both. When disconnecting the power adaptor from a power socket, pull on the adaptor, never on the charging cable. Do not twist or pinch the cable, and do not force a connector into a port. If you receive a message while charging that instructs you to unplug the charging device or power adaptor, disconnect the charging device or power adaptor. Before attempting to charge again, make sure that both the charging cable connector and the device's charging port are dry and clear of any objects.
As the battery in the device ages, you may notice changes in charging performance and battery capacity over time. Batteries are consumable components that age over time and will eventually last fewer hours between charges.
This device must be used with a certified AC adaptor with a limited power source (LPS) output per IEC 60950-1 and/or PS2 classified output per IEC 62368-1, rated: 5 volts DC, maximum 3 amp; 9 volts DC, maximum 3 amp; when used with USB PD-enabled AC adaptor, and up to 11 volts DC, maximum 3 amp for USB PD 3.0 PPS-enabled AC adaptor and qualified per CTIA certification requirements for battery system compliance with IEEE 1725. Only charge your phone with compatible charging accessories available on the Google Store or at Google-authorised resellers (look for Google's 'Made For' badge). Failure to use compatible charging accessories can cause fire, electric shock, injury or damage to the device and the accessories.
Wireless charging
Your device may be charged with a Qi-compliant or Google-approved wireless charger. Do not place other metallic or magnetic objects between the wireless charger and your device, as this could cause heating of the other object or cause your device not to charge properly. Examples of such objects include coins, jewellery, SIM tray tools and credit cards. If using a device case that is metallic or magnetic (except Qi2 compatible cases), remove the case prior to wireless charging as this may cause the device or charger to overheat or may interfere with charging.
Battery
|
WARNING: This device contains lithium-ion batteries, which are sensitive components that can cause injury if damaged. |
This device comes with batteries that have proper certifications. In addition, the batteries comply with the IEEE 1725 standard.
Manage devices with a swollen battery
A swollen battery doesn't typically present a safety hazard provided that you exercise extra caution. It can, however, cause liquids or dust to enter the device more easily. Exposed batteries are more susceptible to accidental damage (e.g. by puncture) and can potentially cause the battery to overheat and cause injury. Here are some best practices if you have a swollen battery.
| Do | Do not |
|
Retrieve personal data or perform a factory reset to 'wipe' device data before you return or recycle the device. Allow your device battery to completely discharge. To do this, leave the device powered on and place it on a table or countertop and let it sit, unused, for several days until the battery naturally drains. Reach out to Google customer support for further guidance. |
Try to 'press down' or force the cover glass or back cover into the phone. Try to pry open the enclosure. Try to remove the swollen battery from the device. Attempt to repair or fix your swollen battery or dissemble your device by yourself. |
Model numbers: GZDQ6
Sunwoda Electronic Co., Ltd.
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States
g.co/regulatory
Battery model ID: G78VQ
Weight: 44.9 g, Capacity: 3437 mAh, RECHARGEABLE, Lithium-ion, Extinguishing agent: Dry powder, CO2, Hazardous substances: Ethyl propionate, propylene carbonate, 1,3-propanesultone, Critical raw materials: Bauxite, cobalt, copper, fluorspar, graphite, light rare-earth elements, lithium, nickel, phosphate rock, phosphorus, Made in China
Battery model ID: GH7LF
Weight: 17.7 g, Capacity: 1221 mAh, RECHARGEABLE, Lithium-ion, Extinguishing agent: Dry powder, CO2, Hazardous substances: Ethyl propionate, propylene carbonate, 1,3-propanesultone, Critical raw materials: Bauxite, cobalt, copper, fluorspar, graphite, light rare-earth elements, lithium, nickel, phosphate rock, phosphorus, Made in China
Disposal, transportation and recycling
Dispose of and transport your device, batteries and accessories according to local environmental and transportation regulations. Do not improperly transport them, and do not dispose of them in normal household waste. Improper disposal or transport may lead to fire, explosion and/or other hazards. Do not open, crush, heat above 45°C (113°F) or incinerate. For more information on recycling your device, batteries and accessories, visit g.co/HWRecyclingProgram.
Repair and service
General instructions for use: This device contains rechargeable lithium-ion batteries, which are sensitive components that can cause injury if damaged. Google recommends that you seek professional assistance for any device repairs. Contact Google, a Google service provider or an independent repair professional to repair your device unless you are an adult and have the technical experience to self-repair your electronic device as set forth at g.co/pixel/contact. Do not open, crush, heat above 45°C (113°F) or incinerate the battery. Your device’s lithium-ion batteries are a consumable component that will degrade over time and will eventually last fewer hours between charges. The batteries in your device were designed to retain up to 80% capacity up to about 1,000 charge cycles. As the batteries in the device age, you may notice changes in charging performance, battery capacity and cycle count over time, and it will eventually need to be replaced. For contact information, visit g.co/pixel/contact.
Self-service repairs: For instructions on how to repair your device, visit g.co/pixelrepair. Your device’s battery should only be replaced to extend the product life. If you choose to perform self-repair, you agree to assume the risk associated with such repair. Use caution if engaging in repair. Opening and/or repairing your device can present a risk of electric shock, device damage, fire and personal injury, and other hazards. Use authentic Google replacement parts, if available in your region. Use of a non-qualified battery and improper disposal may present a risk of fire, explosion, leakage and/or other hazards. Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, microwave, immerse or expose the battery to water, paint or other liquids, or expose the battery to fire, excessive heat and/or other hazards.
Health-related functions
Your device and any general wellness, pedometer, exercise and associated fitness application functions are not medical devices, unless otherwise clearly marked, and are intended for information purposes only. They are not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, monitoring, mitigation, treatment or prevention of disease or other conditions.
Skin irritation
Some people may experience reactions to materials, such as nickel, found in items that are in extended contact with the skin. Stop using the device and consult a doctor if you experience skin irritation in locations that are in frequent contact with the device.
Medical conditions
A small percentage of users may experience headaches, seizures, blackouts, eye strain, fatigue or dry eyes that are triggered by visual stimuli, such as flashing lights or bright patterns, or use of electronics with displays. Those symptoms can be experienced by people who have never previously experienced such issues. If you have a history of seizures, blackouts or epilepsy; a medical condition; or experience discomfort that you believe could be affected by your device, consult a doctor before using your device. Stop using your device immediately and contact a doctor if you experience any symptoms that you believe could be caused or affected by your device (for example, headaches, blackouts or seizures).
LED
The LEDs visible on your device are safe under reasonably foreseeable conditions per the requirements in IEC 62471. However, it is recommended that you do not direct the LEDs at anyone’s eyes.
Consumer laser product
 |
Caution – the device contains a Class 1 laser module. The design of the device incorporates optics and protective housing such that there is no access to a level of laser radiation above Class 1. |
Laser modules in this product comply with EN 50689:2021, EN 60825-1+A11:2021, 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated 8 May 2019. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product should be serviced by Google or an authorised service provider.
Auto-focus laser module: Made in China. STMicroelectronics (R&D) LTD., 1 Tanfield, 1st Floor, Edinburgh EH3 5DA, United Kingdom
Proximity laser module: Made in Austria. ams-OSRAM AG, Tobelbader Str. 30, 8141 Premstaetten, Austria
Radio-frequency exposure
This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the applicable emission limits for exposure to radio-frequency (RF) energy. Radio-frequency exposure information can be found at g.co/pixel/RFE.
To reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, headphones or other similar accessories. Ensure that device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
You can find the SAR values applicable to each of those jurisdictions on your device: Settings
You can find additional information about SAR at the following pages:
fcc.gov
icnirp.org
ec.europa.eu
dot.gov.in
Radio-frequency interference
Observe rules that prohibit the use of wireless technology (e.g. mobile data or Wi-Fi). Your device is designed to comply with regulations governing radio-frequency emissions, but use of wireless devices can negatively affect other electronic equipment. For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation or be illegal. You may be able to use your device in aeroplane mode.
Ultra-wideband (UWB)
When the use of ultra-wideband is prohibited in your region, such as while in an aircraft, ultra-wideband can be turned off by turning on aeroplane mode. Turn on aeroplane mode by going to Quick Settings
Emergency communications
Wireless devices may not be reliable for emergency communications. This device operates using radio signals and cannot guarantee that it will establish or maintain a connection in all conditions. Your device is also powered by a rechargeable battery that may be affected by temperature, use, damage and other conditions. Never rely solely on any wireless phone for emergency communications. While some jurisdictions transmit emergency information over wireless networks, your device may not always receive these communications depending upon network connectivity or other factors. Access to some features and emergency information or communications may not be available in all areas or languages. To initiate an emergency call, you can press the power button and the volume up button at the same time. The screen will then show the emergency call button. Press this button to make the emergency call.
Medical device interference
Your device uses radios and other components that emit electromagnetic fields, and also contains magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and other implanted medical devices. Always keep the device and its charger at a safe distance away from the medical device. If you have questions about using your Google device with or near your medical device, consult your healthcare provider/physician before using your device. If you suspect that your device is interfering with your medical device, turn off your Google device and consult your doctor for information specific to your medical device.
Hospitals
Switch off your wireless device when requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Proper handling and usage
Follow these guidelines when using, storing or cleaning your device.
Care and cleaning
Unplug the device and power adaptor before cleaning, during lightning storms or when unused for extended periods of time. Do not clean your device while it is charging, as this may cause injury or damage to your device. Avoid solvents and abrasive materials that may cause damage to the product's surface. Do not use any chemical detergent, powder or other chemical agents (such as benzene) to clean the device or accessories.
Exposure to makeup, chemicals and dyed materials such as denim can stain light-coloured devices and cases.
To clean your device, we recommend gently wiping it with a soft, lint-free cloth. Use a dry cloth for streaks, smudges or dust, and a slightly damp (not wet) cloth for colour transfers, such as from makeup or a new pair of jeans. For stains and grime, use screen wipes or glasses cleaner on the screen and ordinary household soap or bleach-free cleaning wipes on the back and sides. For additional care and cleaning instructions, see g.co/pixel/care.
To disinfect your device, including your screen, you can use ordinary household disinfecting wipes or 70% isopropyl alcohol-based wipes. Do not use wipes that contain bleach.
Flexible screens are softer than traditional phone screens, so avoid contact with sand, crumbs, fingernails and sharp objects. Ensure that there are no objects or fine particles (such as sand or dirt) on the foldable display or in the display hinge when closing it. Do not remove or peel back the pre-installed screen protector, as it can cause damage. Do not apply a third-party screen protector. Wipe your screen clean regularly.
Water and dust resistance
Your device is designed to comply with dust and water protection rating IP68 under IEC standard 60529 when it leaves the factory, but it is not dustproof or waterproof. Dust and water resistance are not permanent conditions and are diminished or lost over time due to normal wear and tear, device repair, disassembly or damage. Dropping your device may result in loss of dust or water resistance. Liquid damage voids the limited warranty (see below). Do not expose your device to excessive liquids or dust, which could cause a short circuit and/or overheating. The device charger and other accessories are not dust or water resistant and should not be exposed to either. For more information, visit g.co/pixel/water.
Magnetic fields
Avoid placing any items containing magnets or items which are sensitive to magnetism, such as credit cards, bank cards, audio/video tapes or magnetic memory devices, near this device or its charging cable connector, because you may lose information stored on such items. Items containing information sensitive to magnets should be kept at least 5 cm (2 inches) away from this device.
Service and support
Unauthorised or improperly performed repairs or modifications could result in permanent damage to the device or injury, and may affect your warranty coverage and regulatory authorisations. Google recommends that you seek professional assistance for any device repairs. The device should only be repaired by Google, a Google-authorised service provider or a person with sufficient technical expertise to perform device repairs. Contact customer service for authorised service or alternative repair service options.
Subject to legal requirements in your region, devices presented for repair may be replaced by refurbished devices of the same type rather than being repaired, or refurbished parts may be used to repair the device. If the devices are capable of retaining user-generated data, then the repair or replacement may result in loss of the data. For online help and support, visit g.co/pixel/help.
Regulatory information
Regulatory information, certification and compliance marks specific to the device can be found on your device under Settings
EMC compliance statement
Important: This device has demonstrated electromagnetic compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions and other electronic devices.
Regulatory information: United States
FCC regulatory compliance
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorientate or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to a power socket on a different circuit from the one to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Transmitters in the 5.925–7.125 GHz band are prohibited from operating to control or communicate with unmanned aircraft systems.
The operation of this device is prohibited on oil platforms and aircrafts, except that operation of this device in 5.925–6.425 GHz is permitted in large aircrafts while flying above 10,000 feet.
Installation on outdoor fixed infrastructure is prohibited.
Controlling or communications with unmanned aircraft systems, including drones, is prohibited.
Model number: GZDQ6
Product name: Pixel 11 Pro Fold
US responsible party
Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043, USA
Contact: g.co/pixel/contact
Hearing aid compatibility (HAC)
This device is certified to be hearing aid compatible. Additional information can be found at g.co/pixel/HAC or by scanning the QR code below.
Regulatory information: Canada
Industry Canada, Class B
This device complies with ICES-003 Class B limits.
Your device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Operation in the band 5,150–5,250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Devices shall not be used for control of or communications with unmanned aircraft systems.
Devices shall not be used on oil platforms.
Devices shall not be used on aircraft, except for the low-power indoor access points, indoor subordinate devices, low-power client devices and very low-power devices operating in the 5,925–6,425 MHz band that may be used on large aircraft as defined in the Canadian Aviation Regulations, while flying above 3,048 metres (10,000 feet).
Devices shall not be used in motor vehicles, trains and maritime vessels.
Operation in the 5,925–7,125 MHz band (LPI) shall be limited to indoor use only.
Operation on oil platforms, motor vehicles, trains, maritime vessels and aircraft shall be prohibited except for on large aircraft flying above 3,048 m (10,000 ft).
Industrie Canada, Classe B
Cet appareil est conforme aux limites de la norme NMB-003 pour les appareils de classe B.
Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage; (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Les dispositifs ne doivent pas être utilisés pour commander des systèmes d'aéronef sans pilote ni pour communiquer avec de tels systèmes;
Les dispositifs ne doivent pas être utilisés sur les plateformes de forage pétrolier;
Les dispositifs ne doivent pas être utilisés dans les aéronefs, à l'exception des points d'accès intérieurs de faible puissance, des dispositifs subordonnés intérieurs, des dispositifs clients de faible puissance et des dispositifs de très faible puissance fonctionnant dans la bande de 5 925 à 6 425 MHz, qui peuvent être utilisés dans les gros aéronefs tel qu'il est défini dans le Règlement de l'aviation canadien, et ce, lorsqu'ils volent à une altitude supérieure à 3 048 mètres (10 000 pieds).
Les dispositifs ne doivent pas être utilisés dans les automobiles, trains, navires maritime.
Utilisation dans la bande de 5 925 à 7 125 MHz (LPI) limitée à l’intérieur seulement;
leur utilisation à bord de plateformes de forage pétrolier, d'automobiles, de trains, de navires maritimes et d’aéronefs doit être interdite, sauf à bord d’un gros aéronef volant à plus de 3 048 m (10 000 pi) d’altitude.
Regulatory information: EU/UK
EU/UK compliance notice
 |
Hereby, Google LLC declares that radio equipment type: GZDQ6 is in compliance with the relevant UK statutory requirements and EU Directive 2014/53/EU. The full text of the Declaration of Conformity is available at g.co/pixel/conformity. |
In addition, Google LLC declares that this product complies with the Product Security and Telecommunications Act (PSTI). The PSTI Statement of Compliance is available at g.co/pixel/conformity.
Restrictions or requirements under the Radio Equipment Regulations 2017 and under Directive 2014/53/EU
The device is restricted to indoor use only when operating in the 5,250 to 5,350 MHz and the 5,945 to 6,425 MHz (LPI) frequency ranges in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK (NI), CH, IS, LI, NO, TR.
Information on frequency bands and wireless output power
Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.
| Frequency | Power |
| 2,400–2,483.5 MHz | < 20.0 dBm |
| 5,150–5,350 MHz | < 23.0 dBm |
| 5,470–5,725 MHz | < 23.0 dBm |
| 5,725–5,875 MHz | < 14.0 dBm |
| 5,945–6,425 MHz | < 14.0 dBm (VLP)/23.0 dBm (LPI) |
| 13.56 MHz | < -14.0 dBµA/m @ 10m |
| 6.0–8.5 GHz (UWB) | < -1.0 dBm/50 MHz |
| GSM 900 | < 35 dBm |
| GSM 1800 | < 32 dBm |
| UMTS Band I/VIII | < 25.7 dBm |
| LTE B1, B3, B7, B8, B20, B28, B40, B42 | < 25.7 dBm |
| LTE B38, B41 HPUE | < 28.7 dBm |
| NR n1, n3, n7, n8, n20, n28, n38 | < 25.7 dBm |
| NR n40 HPUE | < 29 dBm |
| NR n41, n77, n78 HPUE | < 32 dBm |
| NTN B255, B256 | < 25.7 dBm |
Radio-frequency interference
Google is not responsible for any radio or television interference caused by unauthorised modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorised modification, substitution or attachment is the responsibility of the user. Google and its authorised resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.
Waste electrical and electronic equipment (WEEE) and batteries
 |
The WEEE symbol means that according to local laws and regulations, your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product, its electrical accessories and its battery(ies) will help conserve natural resources, protect human health and help the environment. For more information on proper WEEE and battery disposal, visit g.co/store/weeerecycling and g.co/store/batteryrecycling. |
RoHS compliance
This product is in compliance with UK Statutory Instrument 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations and Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
REACH
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) is the chemical substances regulatory framework, and this product is in compliance with EU EC No 1907/2006 and UK Statutory Instrument 2020 No. 1577. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com.
Common Charger Directive
The power delivered by the charger must be between min. 7.5 watts required by the radio equipment and max. 30 watts in order to achieve the maximum charging speed.
The device supports the USB Power Delivery charging protocol 'USB PD fast charging'.
Ecodesign requirements for sustainable products regulation (EU) 2023/826
See the ecodesign test summary report at g.co/ecodesign.
Increasing the screen timeout setting from the default setting will increase energy usage and reduce battery life.
Activation and deactivation of wireless network ports:
Mobile: Open the Settings app on the device
Wi-Fi: Open the Settings app on the device
Bluetooth: Open the Settings app on the device
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043 United States.
EU: Google Commerce Limited, 70 Sir John Rogerson’s Quay, Dublin 2, D02 R296, Ireland.
UK: Google Commerce Limited UK Establishment, 1 St. Giles High Street, London, WC2H 8AG, United Kingdom.
Regulatory information: Australia
The device is restricted to indoor use only when operating in the 5,250 to 5,350 MHz and 5,945 to 6,425 MHz (LPI) frequency ranges to reduce the potential for harmful interference to co-channel mobile satellite systems.
Ultra-wideband transmitters must not be operated within a nominated distance from specified Australian radio-astronomy sites. For further information about nominated distance, please refer to the Radiocommunications (Low Interference Potential Devices) Class Licence 2015 published by the Australian Communications and Media Authority.
Regulatory information: Japan
When operating in 5 GHz (W52/W53) and 6 GHz (LPI), the device is restricted to indoor use only (except for communication to W52 high-power radios).
5 GHz（W52、W53）および 6 GHz（LPI）周波数帯の場合、デバイスの使用は屋内のみに制限されます（5.2 GHz 帯高出力データ通信システムの基地局や中継局との通信を除く）。
Model: GZDQ6
This is a Class B equipment. Although this equipment is intended for use in a residential environment, it could cause poor reception if used near a radio or a television receiver. Please follow the instructions in the instruction manual.
VCCI-B
Regulatory information: India
Indian-language support
Manufacturer brand identification mark: Google G logo
Model number: GZDQ6
Your device supports Indian official languages as per IS 16333 (Part 3): 2022 and is capable of sending and reading messages in the languages.
Language input:
- English
- Hindi
- Tamil
Message readability:
- Assamese
- Bangla
- Bodo
- Dogri
- English
- Gujarati
- Hindi
- Kannada
- Kashmiri
- Konkani
- Maithili
- Malayalam
- Manipuri
- Marathi
- Nepali
- Oriya
- Punjabi
- Sanskrit
- Santhali
- Sindhi
- Tamil
- Telugu
- Urdu
To find the BIS Certification Marking, go to Settings
This device supports Cell Broadcast Service (CBS) for disaster and other emergency alerts in India. Users can turn alert types on or off, find past alerts and control sound and vibration.
- Open your phone's Settings app.
- Tap Notifications
Wireless emergency alerts.
- Choose how often you want to receive alerts and which settings you want to turn on.
India recycling, e-waste management and handling statement
 |
In India, this label indicates that this product should not be thrown away with household, commercial and industrial waste. It should be deposited at an appropriate facility to allow recovery and recycling. |
Google declares that your device has been designed and manufactured in compliance with E-Waste (Management) Rules 2022 (hereafter 'the Rules'), and is specifically in compliance with Rule 16 (1) on the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their maximum allowed concentrations by weight in the homogenous materials (except for the exemptions listed in schedule II).
Improper handling, disposal, accidental breakage, damage or improper recycling of e-waste may present risks, including, but not limited to, fire, explosion and/or other hazards and uncontrolled waste disposal that may be detrimental to/have adverse effects on the environment as it prevents reuse of resources. Some e-waste may contain hazardous chemicals which, if disposed of improperly, may make water, soil and other natural resources toxic. Improper disposal may cause harm to plant, animal and human life.
For additional EPR details, please visit g.co/envinfo/epr-in.
Regulatory information: Taiwan
台灣法規遵循
使用過度恐傷害視力
(1). 使用30分鐘請休息10分鐘。
(2). 未滿2歲幼兒不看螢幕，2歲以上每天看螢幕不要超過1小時。
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理 法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作。
減少電磁波影響，請妥適使用。
經過格式化的實際儲存空間容量會略減。
Taiwan RoHS
| Equipment name: Pixel 11 Pro Fold, Type designation: GZDQ6 設備名稱：移動電話，型號（型式）：GZDQ6 |
||||||
|
Unit |
限用物質及其化學符號 Restricted substances and their chemical symbols |
|||||
| 鉛Lead (Pb) | 汞Mercury (Hg) | 鎘Cadmium (Cd) | 六價鉻Hexavalent chromium (Cr+6) | 多溴聯苯Polybrominated biphenyls (PBB) | 多溴二苯醚Polybrominated diphenyl ethers (PBDE) | |
| 外殼 Enclosure | O | O | O | O | O | O |
| 電子元件 Electronic component | － | O | O | O | O | O |
| 連接器 Connector | － | O | O | O | O | O |
| 印刷電路板 PCB | O | O | O | O | O | O |
| 顯示屏 Display | O | O | O | O | O | O |
| 包裝 Packaging | O | O | O | O | O | O |
| 其它 Other | O | O | O | O | O | O |
|
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。 Note 1: 'Exceeding 0.1 wt%' and 'Exceeding 0.01 wt%' indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2: 'O' indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.〝－〞係指該項限用物質為排除項目。 Note 3: The '-' indicates that the restricted substance corresponds to the exemption. |
||||||
Regulatory information: Mexico
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Modelo no.: GZDQ6
Características eléctricas: 5Vcc, 3A; 9Vcc, 3A; PPS hasta 11Vcc, 3A
Antes de usar el dispositivo, consulta el manual de instrucciones en él. Para ello, ve a Configuración
Para ver el IMEI del teléfono, marca *#06# o ve a Configuración
Mensajes de alerta del servicio de difusión móvil (CBS): CBS está habilitado y activado en tu teléfono. Puedes habilitar o inhabilitar CBS en Ajustes
Si pierdes el dispositivo o te lo roban, puedes usar Encontrar mi dispositivo, de Google en: https://www.google.com/android/find/
Información sobre la garantía limitada
La garantía limitada del dispositivo también está disponible en la configuración del dispositivo, en Configuración
Limited warranty
The limited warranty is available in the Google Hardware Warranty Centre.
©2026 Google LLC. All rights reserved.
Pixel, G logo, Google and related marks and logos are trademarks of Google LLC.
Qi is a registered trademark of Wireless Power Consortium Inc. Wi-Fi® and the Wi-Fi logo are trademarks of Wi-Fi Alliance. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other trademarks are the property of their respective owners.