Notification

Our software update is being released in phases. New features will gradually roll out across all regions. Stay tuned for updates.

Safety, Warranty & Regulatory Guide for Pixel 6a

Where to find product information

Safety warnings

Proper handling & usage

Service & support

Regulatory information

Accessibility information

Limited warranty

Where to find product information

This guide includes the basic safety guidelines in the printed Safety & Warranty booklet that comes with your Pixel 6a. It also includes additional safety, regulatory, and warranty information about Pixel 6a.

Safety, and regulatory information: g.co/pixel/safety or Settings and then About phone and then Safety & regulatory manual.

Warranty details for your country of purchase, including instructions for making a claim: g.co/pixel/warranty.

Electronic regulatory labels (and specific absorption rate (SAR) values) for your device:
Settings and then About phone and then Regulatory labels.

Comprehensive online help: g.co/pixel/help.

Safety Warnings

Caution WARNING: HEALTH AND SAFETY INFORMATION; READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, PROPERTY DAMAGE, INCLUDING DAMAGE TO YOUR PIXEL 6a ACCESSORIES OR ANY CONNECTED DEVICES, AND OTHER POTENTIAL HAZARDS.

Handling

Handle your phone with care. You may damage the phone or the battery if you disassemble, drop, bend, burn, crush or puncture your device. Do not use a phone with a damaged enclosure, a cracked screen or some other form of physical damage. Using a damaged phone may cause overheating or injury. Do not expose your phone to liquids, which can cause a short circuit and overheating. If your phone gets wet, do not attempt to dry it using an external heat source.

Your phone is designed to work best in ambient temperatures between 32° and 95° F (0° and 35° C), and should be stored between ambient temperatures of -4° and 113° F (-20° and 45° C). Do not expose your phone to temperatures above 113° F (45° C), such as on a car dashboard or near a heating vent, as this may damage the phone, overheat the battery, or pose a risk of fire. Keep your phone away from heat sources and out of direct sunlight. If your device becomes too hot, disconnect it from its power source if it is plugged in, move it to a cooler place and do not use it until it has cooled. Your phone is designed to work best at an altitude of up to 6562 ft (2,000m).

Use of your phone in certain modes, such as gaming, taking videos, using a flashlight setting, or virtual reality or augmented reality features, can cause it to generate more heat than it would under normal operating conditions. This may cause your phone to operate in a reduced-power mode or temporarily shut down. Use extra care when operating the device in these modes. For more information on risks associated with prolonged heat exposure, please refer to the Prolonged Heat Exposure section below.

Repair & service

Do not attempt to repair your phone yourself. Disassembling the device may result in loss of water resistance or cause injury or damage to your device.

For example, the device contains a laser that can be damaged during disassembly which might expose you to hazardous laser emissions which are not visible.

Contact customer service if it isn’t working properly or has been damaged. For more information, visit g.co/pixel/contact.

Charging

Be sure the power adapter and phone are well ventilated when in use or charging. Using damaged cables or power adapters, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the phone or other property. Do not charge your phone when it’s wet. Avoid charging your device in direct sunlight.

When charging the device, make sure the power adapter is plugged into a power outlet near the device and is easily accessible. Do not force this power adapter and other plugs or power adapters to a power outlet if space is not sufficient to accommodate both. When disconnecting the power adapter from a power outlet, pull on the adapter, never on the charging cable. Do not twist or pinch the cable, and do not force a connector into a port. If you receive a message while charging that instructs you to unplug the charging device or power adapter, disconnect the charging device or power adapter. Before attempting to charge again, make sure both the charging cable connector and the phone's charging port are dry and clear of any objects.

Only charge your phone with the included cable or compatible charging accessories, which are available on the Google Store or at Google authorized resellers (look for Google’s “made for” badge). The AC adapter must be certified with a Limited Power Source output per IEC 60950-1 and/or classified PS2 per IEC 62368-1, rated: 5 Volts DC, maximum 3 Amp; 9 Volts DC, maximum 3 Amp when used with USB PD enabled AC adapter and qualified per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Failure to use compatible charging accessories can cause fire, electric shock, injury, or damage to the device and the accessories.

Prolonged heat exposure

The phone and its charger generate heat during normal operation and comply with applicable surface temperature standards and limits. Avoid prolonged skin contact when the device is in use or charging because exposing skin to hot surfaces for a long period of time may cause discomfort or burns. Do not sleep on or with your device or its power adapter, or cover them with a blanket or pillow. Be aware of this issue if you have a physical condition that affects your ability to detect heat against your skin.

Child safety

This device is not a toy. Your phone may contain (or may come with) small parts, plastic, glass, or metal elements, and parts with sharp edges that may cause an injury or create a choking hazard. Children have strangled on cords and cables. Keep the phone’s cords and cables out of the reach of children (more than 3 feet (0.9 meters) away) and do not allow them to play with the phone and its accessories. They could hurt themselves or others, or could accidentally damage the phone. Seek medical attention immediately if small parts are swallowed.

Hearing loss

Prolonged exposure to loud sounds (including music) can cause hearing loss. To prevent possible hearing damage, avoid listening at high volume for prolonged periods of time. Continued exposure to high volumes and background noise can make loud sounds seem quieter than they actually are. Check the volume before using headphones or earphones.

Battery

This phone contains a rechargeable lithium-ion battery, which is a sensitive component that can cause injury if damaged. Do not attempt to remove the battery. Contact Google or a Google authorized service provider to replace the battery. For contact information, visit g.co/pixel/contact. Replacement by non-qualified professionals can damage your device. Improper replacement or use of a non-qualified battery may present a risk of fire, explosion, leakage, or other hazard. Do not modify or remanufacture/refurbish the battery, puncture or attempt to insert objects into the battery, immerse or expose the battery to water or other liquids, or expose the battery to fire, excessive heat, and/or other hazards.

Do not short circuit the battery or allow metallic or conductive objects to contact the battery terminals. Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and you suspect or observe damage, contact Google or a Google authorized service provider for inspection. If the battery leaks, do not allow the leaking fluid to come into contact with eyes, skin, or clothing. If the fluid is already in contact with the eyes, do not rub them. Rinse the eyes with clean water immediately and seek medical advice.

This phone contains a rechargeable lithium-ion battery which complies with IEEE 1725 and other applicable standards.

Disposal, transportation & recycling

Dispose of and transport your device, batteries and accessories according to local environmental and transportation regulations. Do not improperly transport them or dispose of them in normal household waste. Improper disposal or transport may lead to fire, explosion, and/or other hazards. Do not open, crush, heat above 113 ̊F (45 ̊C), or incinerate. For more information on recycling your device, batteries and accessories, visit g.co/pixel/recycle.

Environmental restrictions

To prevent damage to your phone parts or internal circuits, do not use or store the device or its accessories in dusty, smoky, damp, or dirty environments, or near magnetic fields. Keep it away from heat sources and out of direct sunlight. Do not leave your phone inside a vehicle or in places where the temperature may exceed 113° F (45° C), such as on a car dashboard, window sill, near a heating vent, or behind glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the phone, overheat the battery, or pose a risk of fire or explosion.

Explosive atmospheres

Do not charge, use, store, or transport your phone where flammables or explosives are stored (e.g., in gas stations, fuel depots, or chemical plants). Do not use your wireless device where blasting operations are in progress, or in potentially explosive atmospheres such as fuel or chemical transfer or storage areas, and in areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders). Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Observe all notices and signs where these hazards might exist.

Navigation

Your phone can access mapping and navigation services. Maps and navigation depend on a working data connection and location services, and may not be available at all times or in all areas. Maps and directions may be inaccurate and actual conditions may differ from the map, data, traffic, directions, content and other results. Carefully review directions, follow all applicable traffic laws and signs, exercise your independent judgment and apply common sense, and use mapping and navigation services at your own risk. You are responsible at all times for your conduct and its consequences. Navigation with AR requires up to date Google Street View imagery and bright outdoor light, and isn’t available in India.

Distraction

Using your device when performing certain activities can distract you and may cause a dangerous situation for you or others. To reduce the risk of accidents (and because it’s prohibited by law in many places), do not use your device while driving, bicycling, or while operating machinery, and do not use it while engaging in any activities that have potentially serious consequences. Follow local laws about using mobile devices, headphones, and helmets.

Radio frequency exposure

This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the applicable emission limits for exposure to radio frequency (RF) energy.

In the countries where the Specific Absorption Rate (SAR) limit is 1.6 W/kg averaged over one gram of tissue, the highest SAR values for this device type are 1.19 W/kg for Pixel 6a (GB62Z) or 1.18 W/kg for Pixel 6a (GX7AS) W/kg when used against head with no separation and 1.19 W/kg for Pixel 6a (GB62Z) or 1.19 W/kg for Pixel 6a (GX7AS) W/kg against body with 1.0 cm (0.4 in) separation. In the countries where the Specific Absorption Rate (SAR) limit is 2.0 W/kg averaged over ten grams of tissue, the highest SAR values for this device type are 0.99 W/kg when used against head with no separation and 1.31 W/kg against body with 5 mm (0.2 in) separation.

You can find the SAR values applicable to each of those jurisdictions on your phone: Settings and then About phone and then Regulatory labels.

To reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, headphones, or other similar accessories. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

You can find additional information about SAR at the following pages:

Radio frequency interference

Observe rules that prohibit the use of wireless technology (e.g. cellular, Wi-Fi). Your device is designed to comply with regulations governing radio frequency emissions but use of wireless devices can negatively affect other electronic equipment. For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. You may be able to use your device in airplane mode.

Emergency communications

Wireless devices may not be reliable for emergency communications. This device operates using radio signals and may not establish or maintain a connection in all conditions. Your phone is also powered by a rechargeable battery that may be affected by temperature, use, damage, and other conditions. While some jurisdictions transmit emergency information over wireless networks, your device may not always receive these communications depending upon network connectivity or other factors. Access to some features and emergency information or communications may not be available in all areas or languages.

Medical device interference

Your phone uses radios and other components that emit electromagnetic fields, and also contains magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and other implanted medical devices. Always keep the phone and its charger at a safe distance away from the medical device. If you have questions about using your phone with or near your medical device, consult your healthcare provider before using your phone. If you suspect your phone is interfering with your medical device, turn off your Google device and consult your physician for information specific to your medical device.

Hospitals

Switch off your wireless device when requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical
equipment.

Health related functions

Your phone and its associated fitness application functions are not medical devices and are intended for information purposes only. They are not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, monitoring, mitigation, treatment, or prevention of disease or other conditions.

Skin irritation

Some people may experience reactions to materials, such as nickel or latex, found in wearable items that are in extended contact with the skin. This can be due to allergies, the presence of skin irritants (like soap or sweat), or other causes. Keep your phone clean and dry. Remove the phone, stop use and consult a physician if you experience skin irritation or if any body part fits discomfort.

Medical conditions

A small percentage of users may experience headaches, seizures, blackouts, eye strain, fatigue or dry eyes that are triggered by visual stimuli, such as flashing lights or bright patterns, or use of electronics with displays. Those symptoms can be experienced by people who have never previously experienced such issues. If you have a history of seizures, blackouts, epilepsy, a medical condition, or experience discomfort that you believe could be affected by your phone, consult with a doctor before using your device. Stop using your phone immediately and contact a doctor if you experience any symptoms that you believe could be caused or affected by your phone (for example, headaches, blackouts, or seizures).

Musculoskeletal disorders

Repetitive activities, such as typing, tapping, or swiping on the screen of your phone, may cause discomfort in your fingers, hands, wrists, arms, shoulders, or other parts of your body. If you experience any discomfort from such activities, stop using your phone and consult with your doctor.

Class 1 laser product

Caution - Your phone contains a Class 1 laser module. The design of the device incorporates optics and protective housing such that there is no access to a level of laser radiation above Class 1.

Laser modules in this product comply with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product should be serviced by Google or an authorized service provider.

Laser Module: Made in Austria. ams AG, Tobelbader Str. 30, 8141 Oberpremstätten, Austria

Proper handling & usage

Follow these guidelines when using, storing or cleaning of your phone:

Operating temperature

Do not use or charge the phone at ambient temperatures lower than 0°C (32°F) or higher than 35°C (95°F). If the interior temperature of the device exceeds normal operating temperatures, you may experience the following behaviors while the device tries to regulate its temperature: reduced performance and connectivity, inability to charge, or powering down of the display or device power down. You may not be able to use the device while it regulates its temperature. Move the device to a cooler (or warmer) location and wait a few minutes before attempting to use it again.

Care & cleaning

Unplug the phone and power adapter before cleaning, during lightning storms, or when unused for extended periods of time. Do not clean your phone while it is charging as this may cause injury or damage to your device. Avoid solvent and abrasive material that may cause damage to the product surface. Do not use any chemical detergent, powder, or other chemical agents (such as benzene) to clean the phone or accessories.

Exposure to makeup, chemicals, and dyed materials such as denim can stain light colored Pixel 6a and cases.

To clean your phone we recommend gently wiping it with a soft, lint-free cloth. Use a dry cloth for streaks, smudges or dust and a slightly damp (not wet) cloth for color transfers such as from makeup or a new pair of jeans. For stains and grime, use screen wipes or eyeglass cleaner on the screen and ordinary household soap or bleach free cleaning wipes on the back and sides. For additional care and cleaning instructions see g.co/pixel/care.

To disinfect your Pixel 6a, including your screen, you can use ordinary household disinfecting wipes or 70% isopropyl alcohol-based wipes. Do not use wipes that have bleach.

Water resistance

Your phone is water resistant in accordance with IP67 under IEC standard 60529 but it is not waterproof. Water resistance is not a permanent condition and may be compromised by normal wear and tear, repair, disassembly, or damage. Do not expose your phone to liquids, which can cause a short circuit and overheating. The device charger and other accessories are not water resistant and should not be exposed to liquids. Liquid damage voids warranty.

Magnetic fields

Avoid placing any items containing magnets or which are sensitive to magnetism, such as credit cards, bank cards, audio/video tapes, or magnetic memory devices, near this phone or its charging cable connector, because you may lose information stored on such items. Items containing information sensitive to magnets should be kept at least 2 inches (5 cm) away from this phone.

Service & support

Your phone should only be repaired by Google or a Google authorized service provider. Unauthorized repairs or modifications could result in permanent damage to the device, and may affect your warranty coverage and regulatory authorizations. Contact customer service for authorized service. For online help and support, visit g.co/pixel/help. If you send your phone for service, you might receive a replacement phone (in place of your original phone). If you send your phone for service, you might receive a replacement phone that may be refurbished (in place of your original phone). Refurbished parts may be used to repair the goods. Repair or replacement may result in the loss of user-generated data.

Regulatory information

Regulatory information, certification, and compliance marks specific to your Pixel 6a can be found on your phone under Settings and then About phone and then Regulatory labels.

EMC compliance statement

Important: This device and in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

Regulatory information: United States

FCC regulatory compliance

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

  1. These devices may not cause harmful interference.
  2. These devices must accept any interference received, including interference that may cause undesired operation.

Model number: GB62Z, GX7AS
Product name: Pixel 6a

Responsible Party
Google LLC
1600 Amphitheatre Parkway
Mountain View, CA 94043
Contact: g.co/pixel/contact

Hearing Aid Compatibility (HAC)

Your device has been evaluated and certified to be compatible with hearing aids per technical specification ANSI C63.19. There are two measures of hearing aid compatibility:

  • M rating, which is a measure of immunity to radio frequency interference for acoustic coupling hearing aids;
  • T rating, which is a measure of performance when used with an inductive coupling (telecoil) hearing aid.

Pixel 6a is rated M3/T4, according to the FCC hearing aid compatibility regulations for wireless devices.

Per FCC rules, a mobile phone is considered hearing aid compatible if rated M3 or M4 for acoustic coupling or T3 or T4 for inductive coupling.

These phones have been tested and rated for use with hearing aids for some of the wireless technologies that they use. However, there may be some newer wireless technologies used in these phones that have not yet been tested for use with hearing aids. It is important to try the different features of your phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or Google for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

Regulatory information: Canada

Industry Canada, Class B

This device complies with ICES-003 Class B limits.

Cet appareil est conforme aux limites de la norme NMB-003 pour appareils de classe B.

Your device complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

  1. l'appareil ne doit pas produire de brouillage, et
  2. l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.


The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Regulatory information: UK

Hereby, Google LLC declares that radio equipment type: G1AZG is in compliance with Radio Equipment Regulation 2017. The full declaration of conformity may be found at g.co/pixel/conformity.

UK PSTI Statement of Compliance (G1AZG)

Restrictions or Requirements under Radio Equipment Regulations 2017

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz and 5925 to 6425 MHz frequency range in the UK.

Frequency bands & power

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Frequency Power
WiFi 2400-2483.5 MHz < 20 dBm
WiFi 5150-5350 MHz < 23 dBm
WiFi 5470-5725 MHz < 23 dBm
WiFi 5745-5825 MHz < 14 dBm
WiFi 5925-6425 MHz (VLP/LPI) < 14 dBm/< 23 dBm
Bluetooth: 2400-2483.5 MHz < 20 dBm
NFC 13.56 MHz < -10 dBuA/m @10m
GSM 900 < 33.5 dBm
GSM 1800 < 31 dBm
UMTS Band I/VIII < 25.7 dBm
LTE: 1, 3, 7, 8, 20, 28, 38, 40, 42 < 25.5 dBm
LTE: 38 HPUE < 27.2 dBm
NR: n1, n3, n7, n8, n20, n28, n40, n77, n78 < 25.3 dBm
NR: n77 HPUE, n78 HPUE < 27.2 dBm

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

RoHS compliance

This product is in compliance with Statutory Instrument 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substance in Electrical and Electronic Equipment Regulations.

UK REACH

UK REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, Statutory Instrument 2020 No. 1577) is the UK chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com.

UK Waste Electric and Electronic Equipment Regulations; Waste Batteries and Accumulators Regulations; Batteries and Accumulators (Placing on the Market) Regulations

The WEEE symbol left means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling.

The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources, protect human health, and help the environment.

Manufacturer: Google LLC 1600 Amphitheatre Parkway Mountain View, CA, USA 94043

Google Commerce Limited UK Establishment, 1 St. Giles High Street, London, WC2H 8AG, United Kingdom.

Regulatory information: EU

EU compliance notice

Hereby, Google LLC declares that radio equipment type: G1AZG is in compliance with Directive 2014/53/EU (Radio Equipment Directive). The full declaration of conformity may be found at g.co/pixel/conformity.

Restrictions or Requirements under Directive 2014/53/EU

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK(NI), CH, IS, LI, NO, TR.

The device is restricted to indoor use only when operating in the 5925 to 6425 MHz frequency ranges (to the extent those frequencies are made available) in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK(NI), CH, IS, LI, NO, TR.

Frequency bands & power

Data given here is the maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Frequency Power
WiFi 2400-2483.5 MHz < 20 dBm
WiFi 5150-5350 MHz < 23 dBm
WiFi 5470-5725 MHz < 23 dBm
WiFi 5745-5825 MHz < 14 dBm
WiFi 5925-6425 MHz (VLP/LPI) < 14 dBm/< 23 dBm
Bluetooth: 2400-2483.5 MHz < 20 dBm
NFC 13.56 MHz < -10 dBuA/m @10m
GSM 900 < 33.5 dBm
GSM 1800 < 31 dBm
UMTS Band I/VIII < 25.7 dBm
LTE: 1, 3, 7, 8, 20, 28, 38, 40, 42 < 25.5 dBm
LTE: 38 HPUE < 27.2 dBm
NR: n1, n3, n7, n8, n20, n28, n40, n77, n78 < 25.3 dBm
NR: n77 HPUE, n78 HPUE < 27.2 dBm

Radio frequency interference

Google is not responsible for any radio or television interference caused by unauthorized modification of these devices or accessories, or by the substitution or attachment of connecting cables and equipment other than that specified by Google. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user. Google and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.

Specific Absorption Rate (SAR) information

Your device complies with radio frequency specifications when used against head with no separation and body with 5mm separation, limited to 2 W/kg averaged over 10 grams of tissue, and limb with no separation, limited to 4 W/kg, averaged over 10 grams of tissue.

For Pixel 6a, the highest Specific Absorption Rate (SAR) values reported for this device type are Head: 0.99 W/kg, Body: 1.31 W/kg, Limb: 2.99 W/kg.

PRECAUTIONS FOR USE OF THE DEVICE

Use of the device is prohibited in certain situations (for example, while driving) and may be subject to restrictions in certain places (for example, in hospitals, airplanes, gas stations, schools, etc.).

Wearers of electronic implants (pacemakers, insulin pumps, neurostimulators, etc.) must handle the device at a minimum distance of 15 centimeters from the electronic implants, and the device must be held on the side opposite to the electronic implant when the device is being used during a call.

To reduce the amount of exposure to radiation, it is recommended to:

  1. Use the device when there is good mobile network reception (referring to the mobile network signal strength indicator, with more illumination indicating better reception) and avoid using the device in areas with poor mobile network reception such as underground areas, in moving vehicles or trains, and in remote areas.
  2. Keep the device away from the bellies of pregnant women and for teenagers, away from the lower abdomen;
  3. Use the built-in speaker, a hands-free kit, or any other similar accessory to keep your mobile device away from your face and body; and
  4. Ensure reasonable use of the mobile phone by children and teenagers, for example, by avoiding calls at night and limiting the frequency and duration of such calls.

Waste Electrical and Electronic Equipment (WEEE) Directive and Battery Directive

The WEEE symbol left means that according to local laws and regulations your product and its battery(ies) should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling.

The separate collection and recycling of your product, its electrical accessories, and its battery(ies) will help conserve natural resources, protect human health, and help the environment.

Additional Regulatory Information: Italy

Informazioni Sullo Smistamento Degli Imballaggi - Italia

Pixel 6a

RACCOLTA DIFFERENZIATA

Scatola

Carta

PAP 20

Busta

Carta

PAP 21

Pellicola per schermo

Carta

C/PAP 81

Verifica le disposizioni del tuo Comune sullo smaltimento dei rifiuti.

Additional Regulatory Information: France

Fiches Produit Relative Aux Qualités Et Caractéristiques Environnementales - France

Dernière mise à jour : 16 novembre 2023

Pixel 6a

QUALITÉS ET CARACTÉRISTIQUES ENVIRONNEMENTALES DU PRODUIT

Métaux Précieux 

Contient au moins 35 milligrammes de métaux précieux1 

Terres Rares 

Contient au moins 320 milligrammes de terres rares1 

Recyclabilité 

Téléphone majoritairement recyclable

Batterie majoritairement recyclable

Incorporation de Matière Recyclée 

Produit comportant au moins 20% de matières recyclées1,3 

Présence d’une Substance Dangereuse 

Contient une substance extrêmement préoccupante:

1-Methyl-2-pyrrolidone (NMP)

Dodecamethylcyclohexasiloxane

Potassium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate

Hexahydromethylphthalic anhydride

Decamethylcyclopentasiloxane

2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one

1,3-propanesultone

2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone

QUALITÉS ET CARACTÉRISTIQUES ENVIRONNEMENTALES DE L’EMBALLAGE

Recyclabilité 

Emballage majoritairement recyclable4 

QUALITÉS ET CARACTÉRISTIQUES ENVIRONNEMENTALES DU PAPIER

Recyclabilité 

Papier entièrement recyclable

1 Appareil uniquement

2 Basé sur l'évaluation Ecologic 

3 Basé sur le poids du produit

4 Basé sur l'évaluation CITEO TREE

 

RoHS compliance

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

REACH

REACH (Registration, Evaluation, Authorization and Restriction of Chemicals, EC No 1907/2006) is the EU chemical substances regulatory framework. Google complies with all requirements of the regulation and we are committed to providing our customers with information about the presence of REACH Substances of Very High Concern (SVHCs). For information, you can contact Google at Env-Compliance@google.com.

Manufacturer: Google LLC 1600 Amphitheatre Parkway Mountain View, CA, USA 94043

Google Commerce Limited, 70 Sir John Rogerson’s Quay, Dublin 2, D02 R296, Ireland

Regulatory information: Australia

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz and 5925 to 6425 MHz (LPI) frequency ranges to reduce the potential for harmful interference to co-channel mobile satellite systems.

Regulatory information: Singapore

Complies with
IMDA Standards

DA107248

Regulatory information: Japan

When operating in 5GHz (W52/W53), the device is restricted to indoor use only (except communicate to high power radio).

This is a Class B equipment. Although this equipment is intended for use in a residential environment, it could cause poor reception if used near a radio or a television receiver. Please follow instructions in the instruction manual.

VCCI VCCI-B

Regulatory information: India

Specific Absorption Rate (SAR) Information

Your phone is a radio transmitter and receiver. It complies with the international guidelines in relation to the limiting of human exposure to electromagnetic fields, and has been specifically designed to meet the guidelines for exposure to radio waves established by the Department of Telecommunications, Ministry of Communications and Information Technology, Government of India ("DoT"). The guidelines use a unit of measurement known as Specific Absorption Rate ("SAR") which is a unit of body-absorbed radio frequency quantity when the phone is in use. The SAR limit in India for mobile devices is 1.6 W/kg over a mass of 1 gram of human tissue.

Pixel 6a complies with these guidelines when used against head with no separation and body with 10 mm separation. Ensure that device accessories, such as device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

For Pixel 6a , the highest Specific Absorption Rate (SAR) values reported are

  • Head: 1.10 W/kg,
  • Body: 1.16 W/kg.

You can also see SAR values on the website of the DoT/ Telecommunication Engineering Centre.

While most of the laboratory studies have been unable to find a direct link between exposure to radio frequency radiation and health, the DoT has prescribed the following precautionary measures while using the mobile handset:

  • Use a wireless hands-free system (headphone, headset) with a lower power Bluetooth emitter.
  • Make sure the cell phone has a low SAR. Keep your calls short or send a text message (SMS) instead. This advice applies especially to children, adolescents, and pregnant women.
  • Use cell phone when the signal quality is good. People having active medical implants should preferably keep the cell phone at least 15 cm away from the implant.

Recycling, E-waste Management & Handling Statement

In India, this label indicates that this product should not be thrown away with household waste. It should be deposited at an appropriate facility to allow recovery and recycling.

Google declares that your phone has been designed and manufactured in compliance with E-Waste (Management) Rules, 2016 (hereafter "the Rules"), and is specifically in compliance with Rule 16 (1) on the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their maximum allowed concentrations by weight in the homogenous materials (except for the exemptions listed in schedule II).

Improper handling, disposal, accidental breakage, damage or improper recycling of e-waste may present risks, including, but not limited to, fire, explosion and/or other hazards, and uncontrolled waste disposal which may be detrimental to/have adverse effects on the environment as it prevents reuse of resources. Some e-waste may contain hazardous chemicals which, if disposed improperly, may make water, soil and other natural resources toxic. Improper disposal may cause harm to plant, animal and human life."

Regulatory information: Taiwan

無線射頻暴露

以GX7AS而言,SAR標準值2.0W/kg;送測產品實測值為:0.87 W/kg.

台灣法規遵循

使用過度恐傷害視力

  1. 使用30分鐘請休息10分鐘。
  2. 未滿2歲幼兒不看螢幕,2歲以上每天看螢幕不要超過1小時。

減少電磁波影響,請妥適使用

取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

應避免影響附近雷達系統之操作。

經過格式化的實際儲存空間容量會略減。

本公司所經銷之產品當手機雙SIM卡同時插入使用時,PWS接收系統eSIM以4G為主;若雙卡皆使用3G時,則以3G接收為主。

Taiwan RoHS

Equipment Name: Pixel 6a, Type designation: GX7AS
設備名稱: 移動電話,型號(型式):GX7AS



單元\
Unit
限用物質及其化學符號
Restricted Substances and its chemical symbols
鉛Lead
(Pb)
汞Mercury
(Hg)
鎘Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
外殼 Enclosure O O O O O O
電子元件
Electronic Component
O O O O O
連接器 Connector O O O O O
電路板 PCB O O O O O O
顯示 Display O O O O O O
電池 Battery O O O O O
包裝 Packaging O O O O O O
其它 Other O O O O O O

備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

備考2.〝O〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

備考3.〝-〞係指該項限用物質為排除項目。
Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Accessibility Information

Pixel 6a

ACCESSIBILITY FEATURE REQUIREMENTS - DESCRIPTION VALUE

Handset/Hardware information

Touch screen

Does the device have a touch screen

Yes

If the device has a touchscreen, is it capacitive (sometimes referred to as heat activated)

Yes

Key identification

Are individual keys easily discernible to the user

N/A

How are the keys discernible - separate keys, use of ridges to define

N/A

Key centre point distance

What is the distance from the centre point of one number key to another

N/A

Keyboard layout

The keypad is laid out like a QWERTY typewriter keyboard

Yes

Lanyard pin for key ring or lanyard strap

Has a small bar allowing a key ring or neck strap (lanyard) to be attached

No

Differentiation of function keys

The number keys have a different color or shape from the other keys, making them easier to tell apart by touch or by sight

N/A

Shape of device

A. Clam Shell / Flip Phone

B. Candy Bar / Stick

C. Slide

D. Swivel

E. Touchscreen

F. Other

E

Operating system

The operating system and version used by this phone

Android 12

Anti-slip features

Has a non-slip coating or ridges to prevent it slipping out of your hand

No

Mobility/Dexterity features

Handset weight

Handset weight including battery

178 grams

Easy Battery Placement

Is battery clearly marked for proper orientation and placement

N/A

Speaker-phone capable

Hands free operation during dialing and after call initiated

Yes

Guarded/recessed keys

Individual keys are recessed or guarded in some way to reduce the chance that you will press the wrong key

N/A

Wireless earphones/headsets

Wireless earphones and headsets, such as Bluetooth headsets, are supported

Yes

Coupling to a device

To allow people to use computers as text terminals. Also allows customized devices to work with the phone. Device can be connected to the phone by using:

 

cable (an electrical wire)

Yes

infrared signal (which travels through the air like a radio wave but cannot pass through walls or other solid objects)

No

Bluetooth/wireless LAN (radio signals which travel through the air and may also be able to pass through walls or other solid objects)

Yes

other connections than those described above (please describe): NFC

Yes

Flat back for table top operation

Has a flat back, so it can be used while it is lying on a table

Yes

Any key answering

The user can answer the call by pressing any key

No

Hand movement

Some controls require you to pinch or twist them with your fingers, or rotate your wrist

Yes

Voice recognition for dialing

Allows you to dial a number by speaking the person's name, if it is stored in your contact list (a personal "telephone book" you create in your phone)

Yes

Voice recognition for accessing features

Allows you to activate features by speaking commands into the phone, reducing the need to use the keypad

Yes

Automatic answering

Enables the phone to pick up a call automatically after a designated number of rings

No

Vision features

Tactile key markers – "F" and "J"

The "F" and "J" keys have raised dots or bumps on them so you can distinguish them by touch (only relevant for phones that have a QWERTY typewriter-style keypad)

N/A

Standard number key layouts

The number keys are laid out in the standard way with 1 2 3 at the top and * 0 # at the bottom

Yes – touchscreen keyboard

Key feedback - tactile

When you press a key you can feel a physical click, so you know it has been pressed

Yes

Key feedback - audible

When you press a key it makes a sound, so you know it has been pressed

Yes

Audible identification of keys - spoken

When you press a number key the number is spoken out, so you know you have pressed the correct one

Yes

Audible identification of keys - functions

The sounds you hear when you press a key are different for number keys and function keys, so you can easily tell them apart

Yes

Adjustable font - style

You can change the font (typeface) used for the text on the display, which may make it easier to read

Yes

Adjustable font - size

You can make the text on the display larger or smaller to make it easier to read

Yes

Personalized shortcuts

You can assign a particular feature to a single key or a short key sequence

Yes

Display characteristics - Adjustable Contrast Control

You can adjust the contrast of the display to make text and symbols easier to see against the background

Yes

Display characteristics - Adjustable Brightness Control

You can adjust the brightness of the display to make it easier to read

Yes

Display characteristics - Main Display Size

Size of the main display

6.134"  (20:9 aspect ratio)

Display characteristics - Main Display Resolution

The number of dots (called pixels) used to display text and images on the main display. More dots mean more detail.

1080 x 2400
(FHD+ )

Display characteristics - Color Differentiation

The information presented on the display does not rely on color perception for understanding (e.g. you do not have to be able to distinguish red symbols from green symbols)

Yes

Display characteristics - Symbols/Icons

Menus can be displayed using symbols or pictures in a grid layout. This can make them easier for some people to understand or remember

Yes

Display characteristics - Screen Flicker

The main display does not flicker at a rate that could cause problems for people with photo-epilepsy (between 2 Hz and 60 Hz)

Yes

Voice output of caller ID from contacts list

When you receive a call, it speaks the caller's name if it is stored in your contact

No

Voice output of SMS: inbuilt

Can read text messages out loud to you

Yes

Voiced menus

Speaks the menu options, allowing you to access functions even if you cannot read the display

Yes

Alternative format user manual

The user manual is available in alternative formats such as accessible online

Yes

Hearing Features

Vibrating alert

The phone can be set to vibrate when it receives a call or text message or when it gives a warning alert

Yes

Visual alerts - Incoming calls

When a call or text message comes in, it displays a visual alert, such as the caller's name or photo if it is stored in your contact list

Yes

Two-way video communications – using mobile networks

Allows you to make video calls in which you can see the other person and they can see you using your mobile network

Yes

Two-way video communications – using wireless LAN networks

Allows you to make video calls in which you can see the other person and they can see you using your wireless LAN network

Yes

Headset – plug type

The type of plug a headset will need to have so that it can be connected to the phone

USB-C

Hearing aid compatibility

When used with a hearing aid set to the "T" position, the sound is clearer

Yes

Alternative hearing aid technologies

When used with alternative coupling technologies, the sound is clearer

N/A

Messaging Options - MMS

Allows you to send and receive multimedia messages, which can include photographs, audio and video clips

Yes

SMS personalization and reuse

Allows you to create standard text messages that you can quickly send to anyone without having to retype them each time. For example, "I'm in a meeting; I'll call you back"

Yes

Messaging options - Email

Allows you to send and receive email messages

Yes

Internet capability

You can use the phone to browse websites and use other internet-based services

Yes

ADDITIONAL FEATURES & CHARACTERISTICS

Google Pixel 6 Pro is a Touch screen device. However it has the following touch keys : Power and volume control keys

Yes

OPTIONAL FEATURES & ACCESSORIES

The nature of the open operating system and accessibility features mean that some features are provided as part of the Android operating system and as such are subject to change and upgrade during the life of the product

Yes

Limited warranty

The limited warranty is also available in the Google Hardware Warranty Center.

Pixel, Google, G logo and related marks and logos are trademarks of Google LLC. Wi-Fi® and the Wi-Fi logo are trademarks of Wi-Fi Alliance. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other trademarks are the property of their respective owners.

true
Search
Clear search
Close search
Google apps
Main menu