Configure Wi-Fi APs for Orion

Detailed Setup Guides

See detailed setup instructions for the most common enterprise & service provider Wi-Fi controllers. These guides are provided as a courtesy and may not match the experience on your particular firmware. Contact your Wi-Fi equipment manufacturer for additional support.

Generic Setup Instructions

Orion works with any access point that supports Passpoint. If your vendor is not listed above, or the steps listed above do not match your vendor's version, you can still configure your Passpoint-compatible network for Orion.

Orion is deployed to your existing Wi-Fi infrastructure as a new "Orion" SSID. Use your wireless controller's administrative interface to apply the below settings.

Orion SSID

Add a new SSID with the following parameters:

Network Name / SSID	Orion
Hidden SSID	No
Network Security	WPA2 Enterprise (802.1x)
RADIUS Server	See "RadSec / Radius settings"
Hotspot 2.0 / Passpoint	See "Hotspot 2.0 configuration"

RadSec / RADIUS settings

RADIUS Server IPs

Determine if your wireless controller supports RADIUS over TLS (RadSec) and expand the relevant section below. If you're not sure, consult your wireless controller documentation, or look for a "TLS" or "RadSec" option in your wireless controller's RADIUS settings.

My wireless controller DOES support RadSec

Download your radsec.zip from Orion Supply Settings and unzip it.

In your wireless controller, upload or copy/paste the contents of:

bw.radsec.cacert.pem as a radsec CA certificate
cert.pem as radsec client certificate
key.pem as radsec client private key

Apply the following RADIUS settings to your Orion SSID
for both Authentication and Accounting:

Primary Server IP	216.239.32.91
Primary Server Port	2083
Secondary Server IP	216.239.34.91
Secondary Server Port	2083
Shared Secret	radsec
Radsec Server Name / SAN (if needed)	*.orion.area120.com

My wireless controller DOES NOT support RadSec

Download and deploy Orion Radsecproxy, following the steps in the README
Apply the following RADIUS settings to your Orion SSID:

Authentication Server IP	Your radsecproxy IP
Authentication Server Port	1812
Accounting Server IP	Your radsecproxy IP
Accounting Server Port	1813
Shared Secret	radsec

NAS Identifier

Networks in Orion are automatically named based on their NAS-Identifier attribute. All APs on a shared network should use the same NAS Identifier.

Interim-Update Interval

Set your Accounting Interim-Update interval to 5 minutes (300 seconds).

Chargeable User Identity

Your RADIUS Authentication and Accounting packets must include a Chargeable-User-Identity (CUI) attribute.

Hotspot 2.0 (Passpoint) configuration

Enable Hotspot 2.0 on your Orion SSID with the following settings:

Roaming Consortium OI (RCOI)	`F4F5E8F5F4`
Network Type	Chargeable Public

Once the above steps are complete, your AP should begin broadcasting a new "Orion" SSID. You can proceed to set up your test device.

Next: Install the Orion Network Verification app