Test Automatic Connection
Your test device should automatically connect to this network when you are within range.
Test success
The test device should automatically connect to the network. When in range of your test Access Point, open your device's Wi-Fi Networks list and confirm you are connected to Orion:
Test failing?
- Check that your device is set up for testing.
- Mobile devices always prefer saved networks over Hotspot 2.0 networks. If your device is in range of other saved networks, you will need to disconnect from them before testing.
- If your device sees the "Orion" SSID but does not attempt to auto-connect, check your Hotspot 2.0 settings in your wireless controller.
- If your device attempts to connect to the Orion SSID but fails, check your wireless controller's RADIUS logs. If you are receiving a RADIUS-Reject for your test profile, contact orion-support@google.com.
- If you are receiving RADIUS-Accepts from Orion, check your user VLAN. Is your client receiving an IP address?
Measure Network Speed
Use the Orion Network Verification app to measure your network's speed.
Android
- Open the Orion Wifi app
- Tap Measure speed
- Tap Measure Wi-Fi speed
- Grant permission for location if prompted
- Wait for the speed test to complete
iOS
- Confirm you're connected to Orion
- Open the Orion Network Verification app
- Tap Speed test
- Tap WiFi
- Allow location access if prompted
- Wait for the speed test to complete
Results are automatically uploaded and will be reflected in your Orion dashboard within 24 hours.