Set up new jacket or tag

You can use the Jacquard app to set up a replacement jacket or snap tag. Note, these are steps to set up a new jacket or snap tag, after initial setup of Jacquard. If you’re setting up your jacket and snap tag for the first time, please see Jacquard: Quick Start Guide

Set up on Android

To set up a new jacket or snap tag, please follow these steps:

  1. Open the Jacquard app.

  2. Tap the Hanger menu hangerin the the top left corner of the Assign screen.

  3. Tap Jacket information.

  4. Tap Set up new Jacket or tag in the lower left corner of the snap tag device card.

  5. The Jacquard app will ask you to activate the Jacquard snap tag, plug it into any USB port to activate the tag. When ready, tap Tag is ready.

  6. Put on your new jacket and tap I Look Fabulous.

  7. Tuck and snap tag into the jacket cuff.

  8. To pair your jacket select the corresponding serial number that matches the label on the inside right corner of your jacket.

    1. If  serial number of the jacket does not display, unsnap your tag and resnap your tag, then tap Search Again.

  9. After pairing, you will see a screen letting you know that the Jacquard technology has an upgrade available. Do not disconnect your tag during this process as it can cause a failed upgrade.

  10. Your cuff is now active, tap Interact with my jacket.

  11. Tap Try out your new threads to see a visualizer of your new threads. Tap Close to return to the Assign screen.

  12. You’re ready to start using Jacquard.

Set up on iPhone or iPad

To set up a new jacket or snap tag, please follow these steps: 

  1. Open the Jacquard app.

  2. Tap the Hanger menu hanger in the the top left corner of the Assign screen.

  3. Tap Jacket information.

  4. Tap Set up new Jacket or tag in the lower left corner of the snap tag device card.

  5. The Jacquard app will ask you to activate the Jacquard snap tag, plug it into any USB port to activate the tag. When ready, tap Tag is ready.

  6. Put on your new jacket and tap I Look Fabulous.

  7. Tuck and snap tag into the jacket cuff.

  8. To pair your jacket select the corresponding serial number that matches the label on the inside right corner of your jacket.

    1. If  serial number of the jacket does not display, unsnap your tag and resnap your tag, then tap Search Again.

  9. Once the jacket is found, pairing will start automatically.

    1. The LED light on the Jacquard snap tag will go from pulsing blue to solid blue once successfully paired, then stop glowing.

  10. Your cuff is now active, tap Interact with my jacket.

  11. Tap Try out your new threads to see a visualizer of your new threads. Tap Close to return to the Assign screen.

  12. You’re ready to start using Jacquard.

Was this helpful?
How can we improve it?