Install Google Nest Cam Outdoor (wired, 2nd gen)

There are different options to mount and install your Nest Cam Outdoor (wired, 2nd gen). You can run the power cable to an outdoor socket or to a socket inside your home through an existing vent or hole. You can also drill one yourself.

Tip: If you want to install the Nest Cam in an area that doesn't have a power connection, you'll need a junction box installed. If you don't feel comfortable and need help drilling through an exterior wall, contact a pro.

Gather the tools that you need

The box includes:

• Nest Cam Outdoor
• Magnetic wall mount
• Weather-resistant power adaptor
• 8 wall screws
• 8 anchors
• 6 cable clips

To install the wall mount and cable clips, you'll also need a:

• #2 Phillips screwdriver
• Step ladder, if necessary
• Power drill and drill bit:
  • Wood or plasterboard/drywall: 3 mm (3/32 in)
  • Stone, masonry or stucco: 6 mm (¼ in)
• Level

Watch the installation video

Set up your Nest Cam

1. Set up your camera with the Home app. When the app asks which product you want to add, make sure that you select Google Nest Cam Outdoor (wired, 2nd gen).
2. Make sure that you review and comply with all safety guidelines. Locate where all in-wall pipes and electrical wires are before drilling.
3. Leave the lens sticker on until you've finished with your Nest Cam installation. This helps to keep the lens protected from dust and smudges. Make sure that you remove it when you've finished with installation.
4. Plan the cable route starting from your indoor socket to where you'll install your camera.
5. Find a good location outside. Here are some tips to help you decide:

• Tips for camera placement
• Protect against tampering and theft

6. Hold your camera up where you want to install it, and access the video stream with the Nest app to check the Wi-Fi coverage.

• If the camera can't connect to Wi-Fi, or if the video stream is interrupted, you might need to choose another location where the signal is stronger.

Learn how to fix Nest camera or doorbell Wi-Fi connection issues.

Tip: If you need to install your camera beyond the range of your existing network, you can try using a Wi-Fi extender.

Mount your Nest Cam

Once your tools are ready, and have decided where to install the camera, you can now mount it. The Nest Cam Outdoor magnetically attaches to the wall mount, which allows you to install it on brick, wood or other non-metal surfaces.

Step 1: Remove the metal plate from the wall mount

The metal wall plate is attached to the magnetic wall mount. To remove it:

1. Hold the top of the wall mount with one hand.
2. Press the palm of the other hand against the bottom of the base.
3. Twist 30° anticlockwise.

Step 2: Install the included wall plate

Important: Before you drill a hole through your wall, make sure that you check the safety and privacy tips.

1. Hold the plate up where you want to install your camera.
2. Mark the position of the holes and remove the plate.
3. Drill pilot holes.
   • If the wall is made of wood or plasterboard/drywall, use a 2.78 mm (7/64") bit.
   • If the wall is made of a material like brick or stone, you may need to use the wall anchors included. Use a 6 mm (7/32") masonry bit to drill holes for the anchors.

Step 3: Attach the wall plate with the screws

• If the wall is made of wood or plasterboard/drywall, hold the plate up to the wall and insert the screws.
• If the wall is made of a material like brick or stone:

1. Gently tap each anchor into the wall with a hammer until it's flush with the surface.
2. Hold the plate against the wall.
3. Insert the screws into the anchors.

Step 4: Connect the camera to the power adaptor

To plug in the weatherproof power cable and adaptor:

For indoor socket	For outdoor socket
If you want to mount the camera on the hole or wall opening to hide the cable, you can run the cable through the base. If you don't want to mount on the wall opening, you may also run the cable through the vertically aligned gaps in the base. This helps secure the camera.	Depending on your cable route, you can run the cable through: The base to secure the camera. The vertically aligned gaps in the base.

Use the included cable clips and wall anchors to secure the cable to the wall. Leave a bit of slack so that you can adjust the camera once it's connected.

Tip: To have a cleaner installation, route the cable along a ledge or hidden area and paint it to blend in with your house.

Step 5: Secure the camera to the wall plate

1. Twist the magnetic plate clockwise and attach it to the wall plate.
2. Attach the camera to the magnetic plate.

Tip: tMake sure that the camera is upright and the charge cable connection and speaker are at the bottom of the camera. When you mount the camera upright, it ensures that its motion sensor is pointed in the right direction.

Important safety and privacy tips

Make sure that you're following local housing safety regulations. Before you drill a hole through the wall, the placement of the hole shouldn't interfere with your home's wiring or plumbing. If you're not sure, contact an electrician or plumber.

For more information, go to Safety and privacy guidelines.