Install Nest Cam Outdoor

Before you mount your Nest Cam Outdoor, make sure that you’ve set it up and connected it to the Nest app. This article continues from that initial setup.

Watch a video overview

Here's a video you can watch that will walk you through the steps to install your Nest Cam Outdoor. Read below for additional information or if you need help with any of the steps.

How to set up and install Nest Cam Outdoor

Step 1: Get started

Make sure that you’ve set up your Nest Cam Outdoor with the Nest app before you mount it. This article picks up where that one left off. If you haven’t selected a spot for your camera yet, here are some tips to help you decide. Where to put your camera so that you can keep an eye on what you want > How to protect your Nest camera from tampering > Walk over to the intended spot with your phone or tablet (but not your camera yet), and see whether you can get a Wi-Fi signal on your device. This will give you a general idea about Wi-Fi in that area. If there’s no signal at all, you’ll need to find another spot. Think about the path of the power cable on its way to the power socket. We’ve included cable clips that can attach it to walls, eaves and other surfaces. The clips keep the cable secure and give it a cleaner look. Direct sunlight can cause glare and heat up your camera beyond the recommended 40°C (104°F). Look for a shaded spot such as an eave or overhang to install your camera. Make sure that you review the Safety Guidelines for mounting your camera.

 

Step 2: Ready the tools that you need

Many of the items that you’ll need are included in the box: mounting magnet, camera wall plate, adaptor wall plate, cable clips to secure your cable, wall screws and even wall anchors for hard surfaces like brick or stone. To install the wall plate and cable clips, you’ll need a Philips screwdriver and a drill with a 3/32 in (0.23 cm) bit. If you’ll be using the wall anchors, you’ll also need a 7/32 in (0.56 cm) (masonry drill bit and a hammer.

 

Step 3: Plug in your camera

Nest Cam Outdoor’s total power cable length is 7.5 m (25 ft). You’ll need to plug it into a power socket so it can stream video 24/7 and send alerts. You have two options:

Use an outdoor socket

The easiest option is to plug it into an outdoor socket. You might want to install a lockable safety cover over the socket to prevent your camera from being unplugged.

Use an adapter

If you don't have an outdoor socket, you can use a light socket adaptor, which converts a porch or landscaping light into a power socket.

Step 4: Mount your camera

Now that you’ve prepared your supplies, and decided where you want to put your camera, it's time to mount it.

Learn about your camera's mounting magnet

Nest Cam Outdoor’s versatile mounting magnet helps you point your camera exactly where you want. The back of Nest Cam Outdoor attaches magnetically to the double-sided magnet mount. This lets you mount your camera two ways: you can stick the camera and its mounting magnet to a magnetic surface like a galvanised steel gutter or you can install the included metal wall plate on a non-metal surface and stick the camera with its mounting magnet to the plate.

 

Then you can twist and turn the camera on the mounting magnet to get the view that you want. We’ve designed it with a wide range of motion.

If you end up installing your camera upside down, such as under the eaves, you can rotate your camera on the mounting magnet so that it’s the right way up. Or if the camera needs to stay upside down (if you’re running the cable to a socket above the camera, for instance), you can leave your camera as it is and flip the video the right way up with the Nest app.

You have two options for installing your Nest Cam Outdoor. Both are detailed in the sections below.

Option 1: Install the wall plate and mount your camera on brick, wood or another non-metal surface

If you can’t stick the mounting magnet onto a metal surface, you can install the camera’s metal wall plate. Then you can stick your Nest Cam and its mounting magnet to the plate and rotate your camera to get the image that you want.

1. Connect the camera to the power adapter Insert the camera’s USB connector into the power adaptor. Important: Press the collar all the way in and twist clockwise to lock it. This will help ensure a weatherproof seal.

2. Plug in the power cable and adapter

Make sure that there’s enough length from the socket to the camera. You can temporarily run the cable along the path that you’ve planned for it, including eaves and any right-angle bends along walls.

3. Check Wi-Fi coverage with your camera

Hold your camera up where you want to install it, and view the video stream with the Nest app. If the camera can’t connect to Wi-Fi, or if the video stream is interrupted, you might need to pick another location where the signal is stronger. Even a few inches can make a difference. See more Wi-Fi troubleshooting suggestions in the following article. Troubleshooting when your camera is offline > If you need to install your camera beyond the range of your existing network, you can try using a Wi-Fi extender.

4. Install the wall plate

Once you’ve made sure that your camera can stream video from the spot that you’ve chosen, it’s time to install the camera’s wall plate. Remove the protective sticker and backing foam from the wall plate. We recommend that you first drill pilot holes with a 3/32 in (0.23 cm) bit, and then attach the wall plate with the screws. If the wall is made of a material like brick or stone, you may need to use the wall anchors included. Use a 7/32 in (0.56 cm) masonry bit to drill holes for the anchors. Gently tap each anchor into the wall with a hammer until it’s flush with the surface. Then attach the wall plate using the screws.

5. Attach camera to wall plate

Once the plate is secure, attach the mounting magnet to the wall plate. Then, attach Nest Cam to the mounting magnet and aim it where you like. Now you can remove the sticker from your Nest Cam’s lens; it’s only there for protection during delivery and installation. You can check your camera’s video stream in the Nest app to fine-tune its position.

6. Secure the cable

Next, you’ll need to secure the power adapter and cable. Don’t skip this step, which makes it harder for your camera to be accidentally dislodged or tampered with.

 

Option 2: Attach your camera to a metal surface using the magnet

You can attach your camera securely to a metal surface made of steel or iron. Bear in mind that the mounting magnet won’t stick to metals such as aluminium or copper.

1. Connect the camera to the power adapter Insert the camera’s USB connector into the power adaptor. Important: Press the collar all the way in and twist clockwise to lock it. This will help ensure a weatherproof seal.

2. Plug in the power cable and adapter

Make sure that there’s enough length from the socket to the camera. You can temporarily run the cable along the path that you’ve planned for it, including eaves and any right-angle bends along walls.

3. Attach the camera

Attach the mounting magnet to the back of the camera, and place the other side on the metal surface. Since the magnetic power of different metal surfaces can vary, test that the grip is strong enough to securely hold your camera. If you try to attach your camera to a curved surface, like a light pole, the magnet won’t be able to make full contact and it might not hold. So, we recommend attaching it to a flat spot on the metal surface.

4. Check Wi-Fi coverage with your camera

If the camera can’t connect to Wi-Fi, or if the video stream is interrupted, you might need to pick another location where the signal is stronger. Even a few inches can make a difference. See more Wi-Fi troubleshooting suggestions in the following article. Troubleshooting when your camera is offline > If you need to install your camera beyond the range of your existing network, you can try using a Wi-Fi extender. If you haven’t done so yet, remove the sticker from your Nest Cam’s lens; it’s only there for protection during shipping and installation.

5. Secure the cable

Once you’ve made sure that your camera can stream video from its location, you’ll need to secure the power adaptor and cable. Don’t skip this step, so that it makes it harder to accidentally dislodge or be tampered with.

 

Step 5: Secure the power adaptor and cable

Whichever way you've mounted your camera, you’ll need to attach your power adaptor and cable to a wall or other surface to keep it secure. This also makes everything look tidy.

1. Install the first cable clip

Install the first clip within 15 cm (6 inches) of your camera. This can help secure your camera’s position and prevent damage if it ever gets knocked off of its magnetic mount. Here’s how to install each clip: We recommend drilling pilot holes beforehand. Use a 3/32 in (0.23 mm) bit for wood and similar materials. Or, if you’re installing the wall anchors on brick or stone, use a 7/32 in (0.56 m) masonry bit and then gently tap the anchor into the hole with a hammer. Insert the cable into the clip. Screw the clip directly into the wall or into the anchor. Note: If you’re tightening the screw with a drill, be careful not to drill into the cable itself. The cable should be fully inserted into the clip, keeping it away it from the screw

2. Install the power adapter

We recommend installing the adapter at least 50 cm (18 inches) above the ground in case of flooding or deep snow. We included an adaptor wall plate for this purpose. Place the adapter plate with the flat side facing the wall. Drill a hole and insert a wall anchor if needed. Use one of the screws to mount the plate. Then snap the adapter on.

3. Install the rest of the cable clips

Install the second cable clip close to where the USB ring connects to the power adapter. Install the third clip close to the socket so that the cable will be harder to unplug. Install as many of the other clips as you need to route the cable from your camera to the socket.

4. Tidy up the extra cable (optional)

If you end up with extra cable length, here are some tips to keep things looking neat: The cable includes a velcro strap, so you can coil the cable and secure it with the strap. Then you can conceal it behind something else, like landscaping or an overhang. Or you can install a junction box along the route to contain the extra cable.

 

You can paint the power cable and the cable clips to match your home so that they blend in and are harder to spot. If you’ve added a junction box, you can paint that as well. Don’t paint the power adaptor or the camera itself.

Step 6: Finish up

Remove the sticker on the lens if you haven't already. Wipe off any dust or dirt with a soft lint-free cloth

You can paint the cable and the clips to match your home. Do not paint the camera; this can affect performance and void your warranty.

Step 7: Start using your camera

Here are some key articles to help you learn to use your camera.

• Share your camera's video with other people.
• Change your camera's image quality.
• Learn about camera alerts and how to change settings.
• Learn about what you get with a Google Home Premium subscription.

For more help and tips, go to nest.com/camerabasics.