Search
Clear search
Close search
Google apps
Main menu

Use the Daydream View controller and headset

To explore your VR environment in 3D, use the Daydream controller. You’ll be able to point at and click on objects, navigate menus, and more.

How to use the Daydream controller

Controller diagram

  1. Touchpad: Swipe to scroll and press to click.
  2. App button: This button depends on the app you’re using. For example, it might show menus, pause, go back, or change modes.
  3. Home button
  4. Status light: See "What the status light means" below.
  5. Volume buttons
  6. Charging port:  Use a USB Type-C charger.
  7. Wrist strap holes

What the status light means

Light is on continuously

The controller is charged.

Status light on

Light blinks once

The controller is connected and button is pressed.

Status light click

Light blinks brighter and brighter

Controller battery is charging.

Status light charge

Light fades repeatedly

Controller is pairing or connecting.

Status light pairing

Light flashes and fades to off

Controller is disconnected.

Status light disconnect

Light blinks on and off

Controller software is being updated.

Status light update

Charge the controller

To charge the controller, you’ll need a USB Type-C charger. Daydream View doesn’t include a charger or cable.

  • The charger varies by country or region.
  • The input voltage range between the wall outlet and this charger is AC 100V–240V, and the charger’s output voltage is DC 5V.
  • For best results, use a Google-branded charger and USB Type-C cable when charging your controller. Uncertified parts may damage your controller.
  • It may take up to 2 hours to fully charge your Daydream Controller.

You can buy chargers and cables from the Google Store.

Attach a wrist strap

1. On the wrist strap, pinch the thinner cord and insert it into one of the holes at the bottom of the Daydream Controller. Push it through to the other side.

Wrist strap loop
2. Take the looped suede end of the strap and pull it through the loop on the thinner cord.

Wrist strap pull
3. Pull taut and adjust the tab until the strap fits comfortably around your wrist.

Wrist strap adjust

Notes

  • You don't have to turn off your controller off when you leave VR. It will automatically disconnect and save battery.
  • The battery can’t be removed. Don’t attempt to open the controller.

Adjust the Daydream View headset

Adjust your headset for a better fit.

  1. Adjust the strap: Hold both plastic rings and slide them. If you wear glasses, keep them on while wearing the headset.

  2. Move the back of the strap up or down as you adjust the tension. Make sure the straps don’t cover your ears. The headset should rest comfortably against your forehead and face

Arneil is a Daydream expert and author of this help page. Help him improve this article by leaving feedback below.

Was this article helpful?
How can we improve it?